DARKROCK R120 2-Pack 120mm Reverse Infinity Mirror ARGB Case Fan Black
- No Controller
- Case Fan
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
DARKROCK
Six 120 mm white ARGB fans with infinity-mirror lighting, hydro bearings, PWM speed control from 800 to 1600 RPM and 27.7 dBA maximum noise
Model Forward Blade
This six-pack supplies 120 mm case fans with infinite-mirror ARGB lighting on blades and frame. Each unit uses a hydro bearing and eight rubber pads to keep maximum noise at 27.7 dBA while PWM varies speed between 800 and 1600 RPM. White frames and 24 LEDs per fan create a layered visual effect inside the chassis. The 25 mm thickness fits standard mounting points on cases, air coolers and radiators.
Builders who want synchronised ARGB across intake, exhaust and radiator positions will find the pack convenient. Users who require higher static pressure for dense radiator fins or who prefer a single high-airflow fan instead of multiple moderate units should consider other options. The 3-pin power connector limits voltage control on boards that only support 4-pin PWM headers. Systems needing a bundled controller or remote must source one separately.
At 1600 RPM each fan delivers up to 46.7 CFM, which determines how much heat the array can move through a mesh panel or radiator. Nine blades and PWM scaling let the curve match thermal load without exceeding 27.7 dBA. The hydro bearing is rated for long-term operation at these speeds. Verify that your motherboard or controller provides enough 3-pin headers for all six units.
| Fan Controller | No Controller |
|---|---|
| Type | Case Fan |
| Compatibility | Case, CPU Coolers |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800-1600 |
| Air Flow | 46.7 CFM (Max) |
| Noise Level | 27.7 dBA (Max) |
| Power Connector | 3 Pin |
| Color | White |
| LED | ARGB |
| Dimensions | 120 x 120 x 25mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The 6-pack supplies twelve 120 mm fans with 24 ARGB LEDs each, giving uniform lighting and airflow across a full chassis or radiator.
At maximum speed the fans move 46.7 CFM while staying at 27.7 dBA, enough for case, CPU cooler or water-cooling radiator duty.
PWM control is still supported over the 3-pin header, letting the motherboard vary speed between 800 and 1600 RPM.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?