DARKROCK R120 2-Pack 120mm Reverse Infinity Mirror ARGB Case Fan Black
- No Controller
- Case Fan
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
DARKROCK
Three 120 mm white ARGB fans with infinite-mirror lighting, PWM speed control from 800 to 1600 RPM and hydraulic bearings for 27.7 dBA maximum noise
Model Forward Blade
This set contains three white 120 mm case fans with an infinity-mirror ARGB design. Hydraulic bearings and eight rubber pads per fan keep noise to a maximum of 27.7 dBA. A 3-pin power connector and PWM control let the speed range from 800 to 1600 RPM for 46.7 CFM peak airflow.
The ARGB LEDs on blades and frame work with standard motherboard headers for coordinated effects. Users needing a bundled fan controller or a 4-pin PWM header will not find one in this pack. Systems that require higher static pressure or thicker 25 mm slots beyond the stated dimensions should consider other options.
Each fan draws power through a 3-pin connector, so the motherboard or fan hub must provide matching headers. If your board only offers 4-pin PWM headers without voltage control, speed regulation may be limited. Verify header availability before purchase.
| Fan Controller | No Controller |
|---|---|
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800-1600 |
| Air Flow | 46.7 CFM (Max) |
| Noise Level | 27.7 dBA (Max) |
| Power Connector | 3 Pin |
| Color | White |
| LED | ARGB |
| Dimensions | 120 x 120 x 25mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Mount each fan using the four corner holes with the included rubber pads to dampen vibration; the step many miss is connecting both the 3-pin power lead and the separate ARGB cable to the motherboard headers so lighting and speed control both work.
The sealed hydro bearings require no lubrication; simply clean dust from the nine blades and frame every few months with compressed air to keep airflow at 46.7 CFM and noise near 27.7 dBA.
The fan tops out at 1600 RPM ± 10 %; once the motherboard requests that speed the fan cannot spin faster, so sustained loads will plateau at the 46.7 CFM maximum airflow.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?