DARKROCK R120 2-Pack 120mm Reverse Infinity Mirror ARGB Case Fan Black
- No Controller
- Case Fan
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
DARKROCK
Three 120 mm ARGB case fans with infinite-mirror lighting, hydraulic bearings and PWM speed control from 800 to 1600 RPM for quiet 27.7 dBA airflow up to 46.7 CFM
Model Forward Blade
The DARKROCK F120 3-in-1 kit supplies three 120 mm case fans for builders who want coordinated lighting and airflow in a single purchase. Each unit uses a hydro bearing and nine blades to move air through chassis, air coolers or radiators. The black finish suits stealth builds while the addressable RGB zones cover both blades and frame.
An infinity mirror design creates layered visual depth at the centre and edges of every fan, visible through mesh or tempered glass panels. Eight rubber pads on the corners dampen vibration against the case or radiator. A three pin power connector delivers voltage control; no separate controller is included so the motherboard or a compatible hub manages speed and colour.
PWM logic lets the motors spin between 800 and 1600 RPM with a ten percent tolerance, pushing up to 46.7 CFM at the top end. Peak noise stays at 27.7 dBA, keeping the system quiet under typical loads. The hydro bearing and rubber mounts work together to sustain low noise and stable operation over long sessions.
| Fan Controller | No Controller |
|---|---|
| Type | Case Fan |
| Compatibility | Case, CPU Coolers |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800-1600 |
| Air Flow | 46.7 CFM (Max) |
| Noise Level | 27.7 dBA (Max) |
| Power Connector | 3 Pin |
| Color | Black |
| LED | ARGB |
| Dimensions | 120 x 120 x 25mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the fans use a 3-pin connector with PWM control to adjust speed between 800 and 1600 RPM ±10% for optimised cooling performance.
The 121 mm overall size matches the standard 120 mm hole spacing, and the 25 mm thickness fits typical case, air-cooler and water-cooling radiator mounts.
Plug the separate ARGB cable into a 5 V addressable RGB header on the motherboard or controller; do not connect it to a 12 V RGB header or the fan power header.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?