Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Three black 120mm ARGB case fans with infinity mirror design and hydraulic bearings

DARKROCK

DARKROCK F120 3-in-1 120mm ARGB Case Fans Black

SKU CH-G5M6-KCK9Z

Three 120 mm ARGB case fans with infinite-mirror lighting, hydraulic bearings and PWM speed control from 800 to 1600 RPM for quiet 27.7 dBA airflow up to 46.7 CFM

  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase, CPU Coolers
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing

Model Forward Blade

Option 3 Packs

  • Infinite-mirror ARGB creates layered lighting effects across the fan centre and frame
  • PWM control adjusts speed between 800 and 1600 RPM for targeted airflow
  • Nine blades deliver up to 46.7 CFM for effective case or radiator cooling
  • Hydraulic bearing plus eight rubber pads keep noise down to 27.7 dBA
  • 120 mm square frame fits most chassis, air coolers and water-cooling radiators

Triple Pack ARGB Cooling

The DARKROCK F120 3-in-1 kit supplies three 120 mm case fans for builders who want coordinated lighting and airflow in a single purchase. Each unit uses a hydro bearing and nine blades to move air through chassis, air coolers or radiators. The black finish suits stealth builds while the addressable RGB zones cover both blades and frame.

Infinite Mirror Lighting and Mounting

An infinity mirror design creates layered visual depth at the centre and edges of every fan, visible through mesh or tempered glass panels. Eight rubber pads on the corners dampen vibration against the case or radiator. A three pin power connector delivers voltage control; no separate controller is included so the motherboard or a compatible hub manages speed and colour.

Thermals Acoustics and Power Draw

PWM logic lets the motors spin between 800 and 1600 RPM with a ten percent tolerance, pushing up to 46.7 CFM at the top end. Peak noise stays at 27.7 dBA, keeping the system quiet under typical loads. The hydro bearing and rubber mounts work together to sustain low noise and stable operation over long sessions.

Points forts

  • Infinite-mirror ARGB creates layered lighting effects across the fan centre and frame
  • PWM control adjusts speed between 800 and 1600 RPM for targeted airflow
  • Nine blades deliver up to 46.7 CFM for effective case or radiator cooling
  • Hydraulic bearing plus eight rubber pads keep noise down to 27.7 dBA
  • 120 mm square frame fits most chassis, air coolers and water-cooling radiators

Caractéristiques

Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase, CPU Coolers
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM800-1600
Air Flow46.7 CFM (Max)
Noise Level27.7 dBA (Max)
Power Connector3 Pin
ColorBlack
LEDARGB
Dimensions120 x 120 x 25mm

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Does the 3-pin connector on the DARKROCK F120 support PWM speed control from 800 to 1600 RPM?

Yes, the fans use a 3-pin connector with PWM control to adjust speed between 800 and 1600 RPM ±10% for optimised cooling performance.

Will the 121 mm frame and 25 mm thickness fit a standard 120 mm mounting pattern in my case or on a CPU cooler?

The 121 mm overall size matches the standard 120 mm hole spacing, and the 25 mm thickness fits typical case, air-cooler and water-cooling radiator mounts.

How do I connect the ARGB lighting on the fan blades and frame, and what mistake should I avoid?

Plug the separate ARGB cable into a 5 V addressable RGB header on the motherboard or controller; do not connect it to a 12 V RGB header or the fan power header.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.