DARKROCK R120 2-Pack 120mm Reverse Infinity Mirror ARGB Case Fan Black
- No Controller
- Case Fan
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
DARKROCK
Three 120 mm ARGB case fans with infinite-mirror lighting, hydraulic bearings and PWM speed control from 800 to 1600 RPM for quiet 27.7 dBA airflow up to 46.7 CFM
Model Forward Blade
The DARKROCK F120 3-in-1 kit supplies three 120 mm case fans for builders who want coordinated lighting and airflow in a single purchase. Each unit uses a hydro bearing and nine blades to move air through chassis, air coolers or radiators. The black finish suits stealth builds while the addressable RGB zones cover both blades and frame.
An infinity mirror design creates layered visual depth at the centre and edges of every fan, visible through mesh or tempered glass panels. Eight rubber pads on the corners dampen vibration against the case or radiator. A three pin power connector delivers voltage control; no separate controller is included so the motherboard or a compatible hub manages speed and colour.
PWM logic lets the motors spin between 800 and 1600 RPM with a ten percent tolerance, pushing up to 46.7 CFM at the top end. Peak noise stays at 27.7 dBA, keeping the system quiet under typical loads. The hydro bearing and rubber mounts work together to sustain low noise and stable operation over long sessions.
| Fan Controller | No Controller |
|---|---|
| Type | Case Fan |
| Compatibility | Case, CPU Coolers |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800-1600 |
| Air Flow | 46.7 CFM (Max) |
| Noise Level | 27.7 dBA (Max) |
| Power Connector | 3 Pin |
| Color | Black |
| LED | ARGB |
| Dimensions | 120 x 120 x 25mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the fans use a 3-pin connector with PWM control to adjust speed between 800 and 1600 RPM ±10% for optimised cooling performance.
The 121 mm overall size matches the standard 120 mm hole spacing, and the 25 mm thickness fits typical case, air-cooler and water-cooling radiator mounts.
Plug the separate ARGB cable into a 5 V addressable RGB header on the motherboard or controller; do not connect it to a 12 V RGB header or the fan power header.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟