نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Six black 120mm case fans with infinity mirror ARGB lighting on blades and frame

DARKROCK

DARKROCK F120 6-Pack 120mm Infinite Mirror ARGB Case Fans Black

SKU CH-4HXR-8N6VJ

Six 120 mm fans with infinite-mirror ARGB lighting, PWM control from 800 to 1600 RPM, 46.7 CFM airflow and 27.7 dBA noise

  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase, CPU Coolers
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing

Model Forward Blade

Option 6 Packs

  • Infinite mirror design creates layered ARGB visuals across blades and frame
  • 24 ARGB LEDs per fan illuminate both blades and frame for vivid lighting
  • PWM control adjusts speed from 800 to 1600 RPM for optimised airflow
  • Hydro bearing plus eight rubber pads keep noise to 27.7 dBA max
  • 120 mm size fits most cases, CPU coolers and water-cooling radiators

Six-pack ARGB 120 mm fans

The DARKROCK F120 6-pack supplies six 120 mm case fans with infinite-mirror ARGB lighting on both blades and frame. Each fan uses a hydro-dynamic bearing and eight rubber pads to reduce vibration. PWM control lets the motherboard vary speed between 800 and 1600 RPM. The pack is aimed at builders who want coordinated lighting and airflow for a standard ATX chassis.

Sustained-load airflow behaviour

At full PWM duty the fans move up to 46.7 CFM while spinning at 1600 RPM. The nine-blade design maintains steady pressure across radiators or dense heatsink fins, so airflow does not collapse during long rendering or gaming sessions. Speed scales linearly with temperature curves set in BIOS, avoiding sudden rpm spikes when load changes.

Thermals acoustics and power draw

Maximum noise is rated at 27.7 dBA at 1600 RPM, dropping proportionally at lower speeds. The hydro bearing and rubber mounts keep vibration-induced resonance low even after extended operation. Each unit draws power through a standard 3-pin connector, so total system draw rises only modestly when all six fans run at peak speed.

أبرز المميزات

  • Infinite mirror design creates layered ARGB visuals across blades and frame
  • 24 ARGB LEDs per fan illuminate both blades and frame for vivid lighting
  • PWM control adjusts speed from 800 to 1600 RPM for optimised airflow
  • Hydro bearing plus eight rubber pads keep noise to 27.7 dBA max
  • 120 mm size fits most cases, CPU coolers and water-cooling radiators

المواصفات

Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase, CPU Coolers
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM800-1600
Air Flow46.7 CFM (Max)
Noise Level27.7 dBA (Max)
Power Connector3 Pin
ColorBlack
LEDARGB
Dimensions120 x 120 x 25mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How loud are the 120 mm fans at full 1600 RPM when they run all day?

Maximum noise is 27.7 dBA at 1600 RPM, with a hydro-dynamic bearing and eight rubber anti-vibration pads to keep long-term operation quiet.

What motherboard headers are needed to control the 6-pack's ARGB lighting and PWM speeds?

Each fan needs a 3-pin 5 V ARGB header for the 24 LEDs and a 4-pin PWM header for 800–1600 RPM speed control; the pack includes no separate controller.

Will these 120 mm fans fit the mounting holes on my older 120 mm radiator or air cooler?

Yes — standard 120 mm square frame with 25 mm thickness matches legacy 120 mm radiator and cooler mounts.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.