DARKROCK R120 2-Pack 120mm Reverse Infinity Mirror ARGB Case Fan Black
- No Controller
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
DARKROCK
Three 120 mm white ARGB fans with infinite-mirror lighting, PWM speed control from 800 to 1600 RPM and hydraulic bearings for 27.7 dBA maximum noise
Model Forward Blade
This set contains three white 120 mm case fans with an infinity-mirror ARGB design. Hydraulic bearings and eight rubber pads per fan keep noise to a maximum of 27.7 dBA. A 3-pin power connector and PWM control let the speed range from 800 to 1600 RPM for 46.7 CFM peak airflow.
The ARGB LEDs on blades and frame work with standard motherboard headers for coordinated effects. Users needing a bundled fan controller or a 4-pin PWM header will not find one in this pack. Systems that require higher static pressure or thicker 25 mm slots beyond the stated dimensions should consider other options.
Each fan draws power through a 3-pin connector, so the motherboard or fan hub must provide matching headers. If your board only offers 4-pin PWM headers without voltage control, speed regulation may be limited. Verify header availability before purchase.
| Fan Controller | No Controller |
|---|---|
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800-1600 |
| Air Flow | 46.7 CFM (Max) |
| Noise Level | 27.7 dBA (Max) |
| Power Connector | 3 Pin |
| Color | White |
| LED | ARGB |
| Dimensions | 120 x 120 x 25mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Mount each fan using the four corner holes with the included rubber pads to dampen vibration; the step many miss is connecting both the 3-pin power lead and the separate ARGB cable to the motherboard headers so lighting and speed control both work.
The sealed hydro bearings require no lubrication; simply clean dust from the nine blades and frame every few months with compressed air to keep airflow at 46.7 CFM and noise near 27.7 dBA.
The fan tops out at 1600 RPM ± 10 %; once the motherboard requests that speed the fan cannot spin faster, so sustained loads will plateau at the 46.7 CFM maximum airflow.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?