Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

DELL

DELL AL13SXB300N 300GB 15000RPM 2.5" SAS internal hard drive

SKU CH-7YTR-2MGA8 MPN AL13SXB300N

300 GB enterprise SAS drive spinning at 15,000 RPM in a 2.5-inch form factor

  • 300 GB capacity stores large enterprise datasets
  • 15 000 RPM spindle delivers fast transactional throughput
  • SAS interface provides dual-port reliability for servers
  • 5 inch form factor fits dense SFF bays
  • New condition ensures full manufacturer specification compliance

Enterprise SAS Drive

The Dell AL13SXB300N is a 300GB enterprise hard drive built for servers and storage arrays that demand consistent throughput. Its 15000RPM spindle speed suits transaction-heavy workloads and database tiers where low latency matters more than raw capacity.

2.5-Inch SAS Connector

The 2.5-inch form factor fits small-form-factor bays and hot-swap backplanes using a standard SAS interface. Dual-port SAS connectivity enables multipath I/O for redundancy, while the 6Gb/s link speed matches common HBA and RAID controller ports.

No Accessories Included

The drive ships as a bare unit without cables, brackets, mounting screws or management software. System integrators must supply compatible SAS cables, drive carriers and any firmware tools required by their specific server or storage platform.

Priekšrocības

  • 300 GB capacity stores large enterprise datasets
  • 15 000 RPM spindle delivers fast transactional throughput
  • SAS interface provides dual-port reliability for servers
  • 5 inch form factor fits dense SFF bays
  • New condition ensures full manufacturer specification compliance

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What throughput limit does the 6 Gb/s SAS interface impose on this 300 GB drive?

The SAS 6 Gb/s link caps the maximum burst rate at the interface level; sustained transfer will be lower and depends on the 15000 RPM mechanical performance.

Which drive bay and connector spacing does the 2.5-inch SFF form factor require?

It fits a standard 2.5-inch SAS/SATA hot-plug bay with the SFF 29-pin connector; no 3.5-inch adapter is included.

How is the drive installed in a Dell server, and what step is often missed?

Slide the carrier into the hot-plug bay until the latch clicks, then verify the SAS cable is fully seated on the backplane — the latch click alone does not guarantee electrical contact.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.