SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501644BTC
Krājumā
EN-Labs
EN-Labs Dual USB-C PCIe 3.0 x4 Expansion Card
Adds two USB-C ports via a PCIe 3.0 x4 slot with ASMedia ASM3142 chipset for 10 Gbps per port and optional SATA power
- TypePCI Express to USB Card
- Adds two USB-C ports to your desktop
- Up to 10 Gbps transfer speed per port
- ASMedia ASM3142 controller gives each port dedicated bandwidth
- Optional SATA power connector supplies up to 900 mA per port
- Fits PCIe x4, x8 or x16 slots with both full and low-profile brackets included
Two USB-C ports via PCIe 3.0 x4
This EN-Labs expansion card adds two USB-C connectors to a desktop through a PCIe 3.0 x4 slot. It fits PCIe x4, x8 or x16 slots but will not work in an x1 slot. The ASMedia ASM3142 controller supplies dedicated bandwidth to each port. It targets builders who need front-panel USB-C without replacing the motherboard.
Passive cooling with optional SATA power
The card uses passive cooling so it adds no fan noise to the system. Each USB-C port can draw up to 900mA when the optional SATA 15-pin power connector is attached. Without that connector the ports rely on slot power alone. The design suits quiet workstations where thermal headroom is limited.
Full-height and low-profile brackets included
Both full-height and low-profile brackets ship in the box so the card fits standard towers and slim cases alike. Two USB-C ports sit on the bracket for direct cable access. Backward compatibility covers USB 3.1, 3.0 and 2.0 devices. Buyers who need more than two USB-C ports or internal headers will need a different solution.
Priekšrocības
- Adds two USB-C ports to your desktop
- Up to 10 Gbps transfer speed per port
- ASMedia ASM3142 controller gives each port dedicated bandwidth
- Optional SATA power connector supplies up to 900 mA per port
- Fits PCIe x4, x8 or x16 slots with both full and low-profile brackets included
Specifikācijas
| Brand | EN-Labs |
|---|---|
| Type | PCI Express to USB Card |
Jautājumi par šo preci
How do I install the card in a low-profile case and which step is often missed?
Fit the low-profile bracket first, insert the card into a PCIe 3.0 x4, x8 or x16 slot, then connect the SATA 15PIN power cable so each USB-C port can deliver 900mA.
What part will need attention or replacement after extended use?
The SATA 15PIN power connector and its cable are the only serviceable items; the ASM3142 controller and USB-C ports have no user-replaceable components.
What limit appears first when both ports run at 10Gbps continuously?
The PCIe 3.0 x4 host link caps combined throughput at 10Gbps per port, so sustained dual-port transfers sit at the bus ceiling.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
