Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green PLA filament spool 1.75mm 1KG vacuum sealed

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Green 3d printers accessory

SKU CH-6WWC-J205P

PLA filament optimised for fast printing up to 300 mm/s with low warping and precise 1.75 mm diameter on a 1 kg spool

  • ColorGreen
  • TypePLA Basic Filament

color Green

  • Fast printing up to 300 mm/s with improved fluidity
  • Wide compatibility with popular FDM and high-speed printers
  • High success rate, low odour, minimal warping or stringing
  • Tangle-free spool with tight diameter tolerance for smooth feeding
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Green PLA Basic Filament 1.75mm

This green PLA Basic filament from eSUN is designed for FDM 3D printers that run at high speeds. The material adds special additives to standard PLA for better fluidity, making it a cost-effective choice for makers who want fast printing without changing hardware.

Vacuum-sealed spool with desiccant

Each 1KG spool arrives in a vacuum-sealed bag with a desiccant pack to keep the filament dry and dust-free until opened. Tight diameter tolerance and neat winding prevent tangles, so the filament feeds smoothly through the extruder and reduces the risk of nozzle clogs during long prints.

Check temperature range and bed surface

The recommended printing temperature is 215°C within a 210-230°C window, with a heated bed at 45-60°C and fan speed at 100%. Verify that your printer can reach these settings and that you use a compatible build surface such as textured paper, PVP solid glue or PEI for best adhesion.

Priekšrocības

  • Fast printing up to 300 mm/s with improved fluidity
  • Wide compatibility with popular FDM and high-speed printers
  • High success rate, low odour, minimal warping or stringing
  • Tangle-free spool with tight diameter tolerance for smooth feeding
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Specifikācijas

BrandeSUN
Model3D Printer Filament
ColorGreen
TypePLA Basic Filament

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What filament diameter does this 1.75 mm PLA spool use, and what printing speed range does it support?

The filament is 1.75 mm in diameter and prints reliably from 40 to 300 mm/s.

What spool size and weight must my printer accommodate for this 1 kg reel?

The spool holds 1 kg (2.2 lb) of filament; ensure your holder accepts a standard 1 kg cardboard spool.

At what nozzle and bed temperatures should I print this green PLA, and what common mistake causes poor adhesion?

Print at 210–230 °C nozzle and 45–60 °C bed; forgetting to enable 100 % fan speed often leads to warping.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.