Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green PLA filament spool 1.75mm 1KG vacuum sealed

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Green 3d printers accessory

SKU CH-6WWC-J205P

PLA filament optimised for fast printing up to 300 mm/s with low warping and precise 1.75 mm diameter on a 1 kg spool

  • ColorGreen
  • TypePLA Basic Filament

color Green

  • Fast printing up to 300 mm/s with improved fluidity
  • Wide compatibility with popular FDM and high-speed printers
  • High success rate, low odour, minimal warping or stringing
  • Tangle-free spool with tight diameter tolerance for smooth feeding
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Green PLA Basic Filament 1.75mm

This green PLA Basic filament from eSUN is designed for FDM 3D printers that run at high speeds. The material adds special additives to standard PLA for better fluidity, making it a cost-effective choice for makers who want fast printing without changing hardware.

Vacuum-sealed spool with desiccant

Each 1KG spool arrives in a vacuum-sealed bag with a desiccant pack to keep the filament dry and dust-free until opened. Tight diameter tolerance and neat winding prevent tangles, so the filament feeds smoothly through the extruder and reduces the risk of nozzle clogs during long prints.

Check temperature range and bed surface

The recommended printing temperature is 215°C within a 210-230°C window, with a heated bed at 45-60°C and fan speed at 100%. Verify that your printer can reach these settings and that you use a compatible build surface such as textured paper, PVP solid glue or PEI for best adhesion.

Privalumai

  • Fast printing up to 300 mm/s with improved fluidity
  • Wide compatibility with popular FDM and high-speed printers
  • High success rate, low odour, minimal warping or stringing
  • Tangle-free spool with tight diameter tolerance for smooth feeding
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Specifikacijos

BrandeSUN
Model3D Printer Filament
ColorGreen
TypePLA Basic Filament

Kiti šio modelio variantai

Dar 3 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What filament diameter does this 1.75 mm PLA spool use, and what printing speed range does it support?

The filament is 1.75 mm in diameter and prints reliably from 40 to 300 mm/s.

What spool size and weight must my printer accommodate for this 1 kg reel?

The spool holds 1 kg (2.2 lb) of filament; ensure your holder accepts a standard 1 kg cardboard spool.

At what nozzle and bed temperatures should I print this green PLA, and what common mistake causes poor adhesion?

Print at 210–230 °C nozzle and 45–60 °C bed; forgetting to enable 100 % fan speed often leads to warping.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.