Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green PLA filament spool 1.75mm 1KG vacuum sealed

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Green 3d printers accessory

SKU CH-6WWC-J205P

PLA filament optimised for fast printing up to 300 mm/s with low warping and precise 1.75 mm diameter on a 1 kg spool

  • ColorGreen
  • TypePLA Basic Filament

color Green

  • Fast printing up to 300 mm/s with improved fluidity
  • Wide compatibility with popular FDM and high-speed printers
  • High success rate, low odour, minimal warping or stringing
  • Tangle-free spool with tight diameter tolerance for smooth feeding
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Green PLA Basic Filament 1.75mm

This green PLA Basic filament from eSUN is designed for FDM 3D printers that run at high speeds. The material adds special additives to standard PLA for better fluidity, making it a cost-effective choice for makers who want fast printing without changing hardware.

Vacuum-sealed spool with desiccant

Each 1KG spool arrives in a vacuum-sealed bag with a desiccant pack to keep the filament dry and dust-free until opened. Tight diameter tolerance and neat winding prevent tangles, so the filament feeds smoothly through the extruder and reduces the risk of nozzle clogs during long prints.

Check temperature range and bed surface

The recommended printing temperature is 215°C within a 210-230°C window, with a heated bed at 45-60°C and fan speed at 100%. Verify that your printer can reach these settings and that you use a compatible build surface such as textured paper, PVP solid glue or PEI for best adhesion.

Prednosti

  • Fast printing up to 300 mm/s with improved fluidity
  • Wide compatibility with popular FDM and high-speed printers
  • High success rate, low odour, minimal warping or stringing
  • Tangle-free spool with tight diameter tolerance for smooth feeding
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Špecifikácie

BrandeSUN
Model3D Printer Filament
ColorGreen
TypePLA Basic Filament

Ďalšie verzie tohto modelu

Ďalších 3 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What filament diameter does this 1.75 mm PLA spool use, and what printing speed range does it support?

The filament is 1.75 mm in diameter and prints reliably from 40 to 300 mm/s.

What spool size and weight must my printer accommodate for this 1 kg reel?

The spool holds 1 kg (2.2 lb) of filament; ensure your holder accepts a standard 1 kg cardboard spool.

At what nozzle and bed temperatures should I print this green PLA, and what common mistake causes poor adhesion?

Print at 210–230 °C nozzle and 45–60 °C bed; forgetting to enable 100 % fan speed often leads to warping.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.