Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Red PLA filament on a 1 kg spool, 1.75 mm diameter

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Fire Engine Red

SKU CH-HS0Y-EYHSQ

PLA filament optimised for high-speed printing up to 300 mm/s with 23 colour choices

  • ColorBlack
  • TypePLA Basic Filament

color Fire Engine Red

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

Filament for fast FDM printing

eSUN PLA Basic is a 1.75 mm PLA filament formulated for high-speed FDM 3D printers. The material prints at 40-300 mm/s while keeping standard PLA ease of use. A 1 kg spool supplies enough material for many models.

Broad printer compatibility

The filament works with most FDM machines including Bambu Lab, Creality K1 series, Prusa, UltiMaker, Voron, Flashforge, Raise3D, Ender and AnkerMake models. Vacuum-sealed packaging with desiccant keeps the spool dry until first use. Tight diameter tolerance and neat winding prevent tangles and nozzle clogs.

Settings to verify before ordering

Your printer must accept 1.75 mm filament and reach a nozzle temperature of 210-230 °C with a heated bed at 45-60 °C. Fan speed should run at 100 % for best results. Recommended build surfaces are textured paper, PVP solid glue or PEI sheets.

Privalumai

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

Specifikacijos

BrandeSUN
Model3D Printer Filament
ColorBlack
TypePLA Basic Filament

Kiti šio modelio variantai

Dar 3 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 1.75 mm PLA Basic spool need any special storage or drying before I print with it?

The filament ships in a vacuum-sealed bag with a desiccant pack, so it arrives dry and ready to print; reseal the bag after each use to keep moisture out.

What is the practical ceiling for printing speed on a high-speed FDM machine using this material?

The manufacturer rates the filament for 40–300 mm/s, so 300 mm/s is the highest speed they specify for consistent results.

How hot does the nozzle and bed get during an all-day print with Fire Engine Red PLA Basic?

Nozzle temperature runs at 210–230 °C (215 °C recommended) and the heated bed at 45–60 °C with the fan at 100 %.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.