Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Red PLA filament on a 1 kg spool, 1.75 mm diameter

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Fire Engine Red

SKU CH-HS0Y-EYHSQ

PLA filament optimised for high-speed printing up to 300 mm/s with 23 colour choices

  • ColorBlack
  • TypePLA Basic Filament

color Fire Engine Red

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

Filament for fast FDM printing

eSUN PLA Basic is a 1.75 mm PLA filament formulated for high-speed FDM 3D printers. The material prints at 40-300 mm/s while keeping standard PLA ease of use. A 1 kg spool supplies enough material for many models.

Broad printer compatibility

The filament works with most FDM machines including Bambu Lab, Creality K1 series, Prusa, UltiMaker, Voron, Flashforge, Raise3D, Ender and AnkerMake models. Vacuum-sealed packaging with desiccant keeps the spool dry until first use. Tight diameter tolerance and neat winding prevent tangles and nozzle clogs.

Settings to verify before ordering

Your printer must accept 1.75 mm filament and reach a nozzle temperature of 210-230 °C with a heated bed at 45-60 °C. Fan speed should run at 100 % for best results. Recommended build surfaces are textured paper, PVP solid glue or PEI sheets.

Poudarki

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

Specifikacije

BrandeSUN
Model3D Printer Filament
ColorBlack
TypePLA Basic Filament

Druge različice tega modela

še 3 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Will the 1.75 mm PLA Basic spool need any special storage or drying before I print with it?

The filament ships in a vacuum-sealed bag with a desiccant pack, so it arrives dry and ready to print; reseal the bag after each use to keep moisture out.

What is the practical ceiling for printing speed on a high-speed FDM machine using this material?

The manufacturer rates the filament for 40–300 mm/s, so 300 mm/s is the highest speed they specify for consistent results.

How hot does the nozzle and bed get during an all-day print with Fire Engine Red PLA Basic?

Nozzle temperature runs at 210–230 °C (215 °C recommended) and the heated bed at 45–60 °C with the fan at 100 %.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.