Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Red PLA filament on a 1 kg spool, 1.75 mm diameter

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Fire Engine Red

SKU CH-HS0Y-EYHSQ

PLA filament optimised for high-speed printing up to 300 mm/s with 23 colour choices

  • ColorBlack
  • TypePLA Basic Filament

color Fire Engine Red

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

Filament for fast FDM printing

eSUN PLA Basic is a 1.75 mm PLA filament formulated for high-speed FDM 3D printers. The material prints at 40-300 mm/s while keeping standard PLA ease of use. A 1 kg spool supplies enough material for many models.

Broad printer compatibility

The filament works with most FDM machines including Bambu Lab, Creality K1 series, Prusa, UltiMaker, Voron, Flashforge, Raise3D, Ender and AnkerMake models. Vacuum-sealed packaging with desiccant keeps the spool dry until first use. Tight diameter tolerance and neat winding prevent tangles and nozzle clogs.

Settings to verify before ordering

Your printer must accept 1.75 mm filament and reach a nozzle temperature of 210-230 °C with a heated bed at 45-60 °C. Fan speed should run at 100 % for best results. Recommended build surfaces are textured paper, PVP solid glue or PEI sheets.

Pluspunten

  • Optimised fluidity enables fast printing up to 300 mm/s
  • Compatible with most FDM and high-speed 3D printers
  • Low odour, no warping or cracking for reliable prints
  • Tangle-free spool with tight diameter tolerance prevents clogs
  • Vacuum-sealed with desiccant keeps filament dry until use

Specificaties

BrandeSUN
Model3D Printer Filament
ColorBlack
TypePLA Basic Filament

Andere versies van dit model

Nog 3 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 1.75 mm PLA Basic spool need any special storage or drying before I print with it?

The filament ships in a vacuum-sealed bag with a desiccant pack, so it arrives dry and ready to print; reseal the bag after each use to keep moisture out.

What is the practical ceiling for printing speed on a high-speed FDM machine using this material?

The manufacturer rates the filament for 40–300 mm/s, so 300 mm/s is the highest speed they specify for consistent results.

How hot does the nozzle and bed get during an all-day print with Fire Engine Red PLA Basic?

Nozzle temperature runs at 210–230 °C (215 °C recommended) and the heated bed at 45–60 °C with the fan at 100 %.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.