Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black PLA filament spool, 1.75 mm diameter, 1 kg net weight, vacuum-sealed with desiccant

eSUN

eSUN PLA Basic Filament 1.75mm 1KG Black 3d printers accessory

SKU CH-VQ6C-W8WFH

1.75 mm PLA filament on a 1 kg spool prints at 40–300 mm/s with low odor, minimal warping and vacuum-sealed storage

  • ColorBlack
  • TypePLA Basic Filament

color Orange

  • Optimised fluidity for fast printing up to 300 mm/s
  • Broad FDM compatibility including Bambu Lab and Creality models
  • Low shrinkage and warping for high print success
  • Tangle-free winding with tight diameter tolerance
  • Vacuum-sealed spool with desiccant for moisture protection

Filament for high-speed FDM printing

eSUN PLA Basic Filament is a 1.75 mm PLA spool engineered for fast printing on compatible FDM machines. It suits makers, educators and small-batch producers who want reliable output at elevated speeds without changing their usual PLA workflow. The material prints cleanly on printers such as Bambu Lab, Creality K1, Voron 2.4 and many others.

Thermals and print behaviour

Recommended nozzle temperature sits at 215 °C within a 210–230 °C window, while the heated bed runs at 45–60 °C with fan speed at 100 %. The formulation cools quickly, enabling printing speeds from 40 up to 300 mm/s with low stringing, minimal warping and low odour. Consistent diameter tolerance and tight winding prevent nozzle clogs during long, high-speed runs.

Build integration and storage

Each 1 kg spool (2.2 lbs) arrives vacuum-sealed with desiccant, keeping the filament dry and dust-free until first use. The cardboard spool works directly on most printers; an STL adapter for alternative spool holders is available from the manufacturer. The material adheres well to textured paper, PVP glue stick or PEI surfaces, freeing you from specialised bed treatments.

Pluspunten

  • Optimised fluidity for fast printing up to 300 mm/s
  • Broad FDM compatibility including Bambu Lab and Creality models
  • Low shrinkage and warping for high print success
  • Tangle-free winding with tight diameter tolerance
  • Vacuum-sealed spool with desiccant for moisture protection

Specificaties

BrandeSUN
Model3D Printer Filament
ColorBlack
TypePLA Basic Filament

Andere versies van dit model

Nog 3 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I load the 1.75mm filament into my printer and what step causes jams?

Heat the nozzle to 210-230°C, push filament until it extrudes cleanly; the step people skip is trimming the tip at 45° so it catches the drive gear instead of curling beside it.

When will this 1KG spool need replacing and how should I store the remainder?

A 1KG spool lasts until the printed parts weigh roughly 1KG; reseal any unused length in the original vacuum bag with the desiccant to stop moisture absorption.

What is the first limit I hit when printing continuously at 300mm/s?

At 300mm/s the melt rate becomes the bottleneck — the filament cannot absorb heat fast enough, causing under-extrusion before the printer mechanics reach their limit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.