Geometric Future M5 Vent Black/Yellow PC Case
- ATX Mid Tower
- Black/Yellow
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Geometric Future
Mid-tower chassis with dual-chamber layout fits E-ATX boards, 460 mm GPUs and 420 mm radiators
The Geometric Future M5 is a mid-tower chassis that accepts Extended ATX motherboards and graphics cards up to 460 mm long. Its dual-chamber layout separates the power supply from the main component area, giving builders a cleaner internal workspace. The structure uses 1.2 mm steel throughout for rigidity.
Two hinged tempered-glass panels open without tools for quick access to the interior. Five 140 mm fans come fitted from the factory at the rear, right-front, and bottom positions, delivering immediate airflow. A front-mounted USB Type-C port is included for modern peripherals.
The top chamber supports radiators up to 420 mm, while the bottom mounts a 360 mm unit and the rear takes 120 mm or 140 mm. CPU coolers are capped at 180 mm height and the power supply bay fits units up to 160 mm long. Ten 120 mm fan slots exist in total, but only the five 140 mm units are supplied.
| Brand | Geometric Future |
|---|---|
| Series | M5 |
| Type | ATX Mid Tower |
| Color | Black / Green |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm(pre-installed) x1 Right Front : 120/140(pre-installed)/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm(pre-installed) x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad |
| 140mm Fans | 5 |
| Max GPU Length | 460mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The five pre-installed fans use standard 120 mm and 140 mm frames, so they can be cleaned with compressed air or swapped for replacements of the same size when bearings wear out.
The 180 mm CPU cooler height clearance and the 460 mm GPU length limit define the largest components that fit, so radiator thickness and tubing routing become the practical ceiling before airflow does.
The 0.8 mm to 1.2 mm steel construction dampens mid-range fan noise, while the tempered glass side panels vent heat directly; actual dB and temperature figures depend on the specific fan curves and hardware installed.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?