NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Gulfe
ATX power supply with reduced depth, 24-pin ATX, 4-pin P4, three SATA and two LP4 connectors, plus over-current and over-power protection
This Gulfe ATX unit is built as a direct replacement for the HP Pavilion Elite M9295TW and M9350F desktop PCs. It matches the original form factor and connector layout required by these specific legacy systems. The power supply delivers the necessary voltage rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V, and +5V-SB. It is suited for owners restoring or repairing these particular HP models.
Installation follows a standard ATX procedure using the included 24-pin (20+4) main connector, a P4 4-pin CPU connector, three SATA 15-pin connectors, two LP4 4-pin connectors, and one floppy 4-pin connector. The reduced depth of 5.86 inches by 3.3 inches helps it fit the chassis without clearance issues. A common mistake is forcing the keyed 24-pin connector into the motherboard header the wrong way round; align the clip before pressing firmly until it clicks.
Before ordering, confirm your desktop is an HP Pavilion Elite M9295TW or M9350F, as other HP models may use different proprietary pinouts or physical dimensions. Check that your motherboard requires a standard 24-pin ATX and a 4-pin P4 CPU power connector, not a proprietary HP connector. Ensure you need the provided mix of three SATA, two LP4, and one floppy power connector for your drives. The unit weighs 2.5 and operates on 115/230 V input.
| Brand | Gulfe |
|---|---|
| Type | ATX |
| Fans | 1 |
| Weight | 2.5 |
The system should power on without shutdowns; the single fan must spin and the supply provides +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails with over-current and over-power protection active.
It includes a 24-pin ATX (20+4), one 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector; no additional cables are required if your components use these interfaces.
This single ATX reduced-depth model (5.9" height × 3.4" width, 2.5 kg) replaces the legacy supplies used in both the M9295 and M9350 series, so no other version or capacity option exists.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?