NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Gulfe
ATX power supply with reduced depth, 24-pin ATX, 4-pin P4, three SATA and two LP4 connectors, plus over-current and over-power protection
This Gulfe ATX unit is built as a direct replacement for the HP Pavilion Elite M9295TW and M9350F desktop PCs. It matches the original form factor and connector layout required by these specific legacy systems. The power supply delivers the necessary voltage rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V, and +5V-SB. It is suited for owners restoring or repairing these particular HP models.
Installation follows a standard ATX procedure using the included 24-pin (20+4) main connector, a P4 4-pin CPU connector, three SATA 15-pin connectors, two LP4 4-pin connectors, and one floppy 4-pin connector. The reduced depth of 5.86 inches by 3.3 inches helps it fit the chassis without clearance issues. A common mistake is forcing the keyed 24-pin connector into the motherboard header the wrong way round; align the clip before pressing firmly until it clicks.
Before ordering, confirm your desktop is an HP Pavilion Elite M9295TW or M9350F, as other HP models may use different proprietary pinouts or physical dimensions. Check that your motherboard requires a standard 24-pin ATX and a 4-pin P4 CPU power connector, not a proprietary HP connector. Ensure you need the provided mix of three SATA, two LP4, and one floppy power connector for your drives. The unit weighs 2.5 and operates on 115/230 V input.
| Brand | Gulfe |
|---|---|
| Type | ATX |
| Fans | 1 |
| Weight | 2.5 |
The system should power on without shutdowns; the single fan must spin and the supply provides +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails with over-current and over-power protection active.
It includes a 24-pin ATX (20+4), one 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector; no additional cables are required if your components use these interfaces.
This single ATX reduced-depth model (5.9" height × 3.4" width, 2.5 kg) replaces the legacy supplies used in both the M9295 and M9350 series, so no other version or capacity option exists.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?