NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Gulfe
ATX power supply with reduced depth, 24-pin ATX, 4-pin P4, three SATA and two LP4 connectors, plus over-current and over-power protection
This Gulfe ATX unit is built as a direct replacement for the HP Pavilion Elite M9295TW and M9350F desktop PCs. It matches the original form factor and connector layout required by these specific legacy systems. The power supply delivers the necessary voltage rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V, and +5V-SB. It is suited for owners restoring or repairing these particular HP models.
Installation follows a standard ATX procedure using the included 24-pin (20+4) main connector, a P4 4-pin CPU connector, three SATA 15-pin connectors, two LP4 4-pin connectors, and one floppy 4-pin connector. The reduced depth of 5.86 inches by 3.3 inches helps it fit the chassis without clearance issues. A common mistake is forcing the keyed 24-pin connector into the motherboard header the wrong way round; align the clip before pressing firmly until it clicks.
Before ordering, confirm your desktop is an HP Pavilion Elite M9295TW or M9350F, as other HP models may use different proprietary pinouts or physical dimensions. Check that your motherboard requires a standard 24-pin ATX and a 4-pin P4 CPU power connector, not a proprietary HP connector. Ensure you need the provided mix of three SATA, two LP4, and one floppy power connector for your drives. The unit weighs 2.5 and operates on 115/230 V input.
| Brand | Gulfe |
|---|---|
| Type | ATX |
| Fans | 1 |
| Weight | 2.5 |
The system should power on without shutdowns; the single fan must spin and the supply provides +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails with over-current and over-power protection active.
It includes a 24-pin ATX (20+4), one 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector; no additional cables are required if your components use these interfaces.
This single ATX reduced-depth model (5.9" height × 3.4" width, 2.5 kg) replaces the legacy supplies used in both the M9295 and M9350 series, so no other version or capacity option exists.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?