Intel DC S3610 SSDSC2BX400G401 2.5" 400GB SATA enterprise SSD
- 2.5"
- 400GB
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Intel
2.5-inch SATA enterprise SSD with 480 GB MLC storage, 550 MB/s read, 450 MB/s write, 84,000 read IOPS, 28,000 write IOPS, AES 256-bit encryption and power-loss data protection
The Intel DC S3610 SSDSC2BX480G401 is a 2.5-inch enterprise solid-state drive with a 480 GB capacity. It connects through a SATA III interface and uses MLC NAND built on 20 nm lithography. The drive delivers sequential reads up to 550 MBps and writes up to 450 MBps.
This SSD fits servers and storage arrays that demand high endurance and consistent low latency. Enhanced power-loss data protection, AES 256-bit hardware encryption and end-to-end data protection safeguard data integrity. Organisations needing capacities beyond 480 GB or a different interface should consider other options.
The SATA III interface sets the maximum data-transfer rate at 600 Mbps and determines host compatibility. Random performance reaches 84,000 IOPS for 4 KB reads and 28,000 IOPS for 4 KB writes. Verify that the target system provides a SATA 6 Gbps port before purchase.
| Brand | Intel |
|---|---|
| Series | DC S3610 |
| Model | SSDSC2BX480G401 |
| Form Factor | 2.5" |
| Capacity | 480GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 450 MBps |
| 4KB Random Read | Up to 84,000 IOPS |
| 4KB Random Write | Up to 28,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 5.2W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g +/- 2g |
| Sūtījuma svars | 0.48 kg |
| Sūtījuma izmēri | 203 × 152 × 114 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, it requires a standard 2.5" drive bay with SATA III data and power connections to function.
The drive operates on the SATA 6Gb/s interface and will negotiate the highest link speed supported by the controller.
Run a sequential benchmark tool; results approaching 550 MBps read and 450 MBps write confirm expected operation.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?