KingSpec NX-128 2280 128GB PCIe 3.0 x4 NVMe 1.3 internal SSD
- Internal Solid Stat…
- Consumer
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
KingSpec
A 512GB M.2 2280 PCIe 3.0 NVMe 1.3 internal SSD with 3D NAND delivering up to 3400 MB/s read, 2500 MB/s write, 380,000 random read IOPS and 320,000 random write IOPS
Options NX-512-2280
The KingSpec NX-512 2280 is a 512GB internal SSD built on the M.2 2280 form factor. It connects through a PCI-Express 3.0 x4 interface using the NVMe 1.3 protocol and uses 3D NAND flash memory. Sequential reads reach up to 3400 MBps and writes up to 2500 MBps.
This drive suits desktop and laptop users who need a straightforward NVMe upgrade for faster boot times and application loading. It works in any system with an M.2 2280 slot that supports PCIe 3.0 x4. Buyers who require a built-in heatsink or higher endurance than 480TB total bytes written should consider other models.
The PCIe 3.0 x4 interface paired with NVMe 1.3 determines whether this SSD will operate at its rated 3400 MBps read and 2500 MBps write speeds. A slot limited to PCIe 2.0 or SATA will not deliver these figures.
| Brand | KingSpec |
|---|---|
| Series | NX 2280 Series |
| Model | NX-512 2280 |
| Part Number | NX-512 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 3400 MBps |
| Max Sequential Write | Up to 2500 MBps |
| 4KB Random Read | Up to 380,000 IOPS |
| 4KB Random Write | Up to 320,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.71W |
| Power Consumption (Active) | 4.66W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 2.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 50g |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the drive uses the M.2 2280 form factor and connects via PCIe 3.0 x4 with NVMe 1.3, so the motherboard must provide that slot and protocol.
It will work if the system has a free M.2 2280 PCIe 3.0 x4 slot; the NVMe drive operates independently of any existing SATA storage.
Run a benchmark tool such as CrystalDiskMark on the NVMe drive; sequential results should approach 3400 MBps read and 2500 MBps write.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?