KingSpec NX-128 2280 128GB PCIe 3.0 x4 NVMe 1.3 internal SSD
- Internal Solid Stat…
- Consumer
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
KingSpec
A 512GB M.2 2280 PCIe 3.0 NVMe 1.3 internal SSD with 3D NAND delivering up to 3400 MB/s read, 2500 MB/s write, 380,000 random read IOPS and 320,000 random write IOPS
Options NX-512-2280
The KingSpec NX-512 2280 is a 512GB internal SSD built on the M.2 2280 form factor. It connects through a PCI-Express 3.0 x4 interface using the NVMe 1.3 protocol and uses 3D NAND flash memory. Sequential reads reach up to 3400 MBps and writes up to 2500 MBps.
This drive suits desktop and laptop users who need a straightforward NVMe upgrade for faster boot times and application loading. It works in any system with an M.2 2280 slot that supports PCIe 3.0 x4. Buyers who require a built-in heatsink or higher endurance than 480TB total bytes written should consider other models.
The PCIe 3.0 x4 interface paired with NVMe 1.3 determines whether this SSD will operate at its rated 3400 MBps read and 2500 MBps write speeds. A slot limited to PCIe 2.0 or SATA will not deliver these figures.
| Brand | KingSpec |
|---|---|
| Series | NX 2280 Series |
| Model | NX-512 2280 |
| Part Number | NX-512 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 3400 MBps |
| Max Sequential Write | Up to 2500 MBps |
| 4KB Random Read | Up to 380,000 IOPS |
| 4KB Random Write | Up to 320,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.71W |
| Power Consumption (Active) | 4.66W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 2.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 50g |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Yes, the drive uses the M.2 2280 form factor and connects via PCIe 3.0 x4 with NVMe 1.3, so the motherboard must provide that slot and protocol.
It will work if the system has a free M.2 2280 PCIe 3.0 x4 slot; the NVMe drive operates independently of any existing SATA storage.
Run a benchmark tool such as CrystalDiskMark on the NVMe drive; sequential results should approach 3400 MBps read and 2500 MBps write.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?