KingSpec NX-128 2280 128GB PCIe 3.0 x4 NVMe 1.3 internal SSD
- Internal Solid Stat…
- Consumer
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
KingSpec
A 512GB M.2 2280 PCIe 3.0 NVMe 1.3 internal SSD with 3D NAND delivering up to 3400 MB/s read, 2500 MB/s write, 380,000 random read IOPS and 320,000 random write IOPS
Options NX-512-2280
The KingSpec NX-512 2280 is a 512GB internal SSD built on the M.2 2280 form factor. It connects through a PCI-Express 3.0 x4 interface using the NVMe 1.3 protocol and uses 3D NAND flash memory. Sequential reads reach up to 3400 MBps and writes up to 2500 MBps.
This drive suits desktop and laptop users who need a straightforward NVMe upgrade for faster boot times and application loading. It works in any system with an M.2 2280 slot that supports PCIe 3.0 x4. Buyers who require a built-in heatsink or higher endurance than 480TB total bytes written should consider other models.
The PCIe 3.0 x4 interface paired with NVMe 1.3 determines whether this SSD will operate at its rated 3400 MBps read and 2500 MBps write speeds. A slot limited to PCIe 2.0 or SATA will not deliver these figures.
| Brand | KingSpec |
|---|---|
| Series | NX 2280 Series |
| Model | NX-512 2280 |
| Part Number | NX-512 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 3400 MBps |
| Max Sequential Write | Up to 2500 MBps |
| 4KB Random Read | Up to 380,000 IOPS |
| 4KB Random Write | Up to 320,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.71W |
| Power Consumption (Active) | 4.66W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 2.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 50g |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
Yes, the drive uses the M.2 2280 form factor and connects via PCIe 3.0 x4 with NVMe 1.3, so the motherboard must provide that slot and protocol.
It will work if the system has a free M.2 2280 PCIe 3.0 x4 slot; the NVMe drive operates independently of any existing SATA storage.
Run a benchmark tool such as CrystalDiskMark on the NVMe drive; sequential results should approach 3400 MBps read and 2500 MBps write.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?