Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips and gold 240-pin edge connector

Kingston Technology Corp.

Kingston Technology Corp. KVR400D2D8R3/1G 1GB DDR2 240-pin DIMM desktop RAM

SKU CH-QY55-BYEQ3

1GB DDR2 240-pin DIMM desktop memory running at 400 MT/s with 1.8V supply

  • Capacity1GB
  • 1GB capacity for basic desktop tasks
  • DDR2 technology at 400MHz speed
  • 240-pin DIMM fits standard desktop slots
  • 8V operation reduces power draw
  • 128M x 72 dual-rank configuration

1GB DDR2 desktop memory module

This 1GB DDR2 module plugs into a standard 240-pin DIMM slot on a desktop motherboard. It is suited for systems that require a single stick of dual-rank memory running at 1.8V.

Upgrade path for legacy DDR2 platforms

The module replaces an empty slot or a lower-capacity stick in a board that accepts DDR2 memory. The jump is worthwhile when the existing configuration cannot hold the operating system and active applications together.

Build integration with 1.8V DDR2 boards

The stick needs a motherboard with 240-pin DDR2 slots and a memory controller that supports 128M x 72 organisation at 1.8V. It frees one slot for additional modules while keeping the voltage requirement consistent across the array.

Priekšrocības

  • 1GB capacity for basic desktop tasks
  • DDR2 technology at 400MHz speed
  • 240-pin DIMM fits standard desktop slots
  • 8V operation reduces power draw
  • 128M x 72 dual-rank configuration

Specifikācijas

Capacity1GB

Jautājumi par šo preci

Will the 240-pin DIMM fit my motherboard slots?

The module uses the standard 240-pin DIMM form factor for DDR2 desktop memory. Check that your board has DDR2 DIMM slots and supports 1.8V operation before installing.

How do I install the 1GB DDR2 module correctly?

Power off the PC, open the case, align the notch on the module with the slot key, press firmly until both retention clips click. The step often missed is verifying the clips fully lock on both ends.

Does the 128M x 72 dual-rank module need any future maintenance?

No routine maintenance is required for this DDR2 DIMM. If errors appear later, run a memory diagnostic and reseat the module; replacement is only needed if the module itself fails.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.