Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board with black memory chips and gold 240-pin edge connector

Kingston Technology Corp.

Kingston Technology Corp. KVR400D2D8R3/1G 1GB DDR2 240-pin DIMM desktop RAM

SKU CH-QY55-BYEQ3

1GB DDR2 240-pin DIMM desktop memory running at 400 MT/s with 1.8V supply

  • Capacity1GB
  • 1GB capacity for basic desktop tasks
  • DDR2 technology at 400MHz speed
  • 240-pin DIMM fits standard desktop slots
  • 8V operation reduces power draw
  • 128M x 72 dual-rank configuration

1GB DDR2 desktop memory module

This 1GB DDR2 module plugs into a standard 240-pin DIMM slot on a desktop motherboard. It is suited for systems that require a single stick of dual-rank memory running at 1.8V.

Upgrade path for legacy DDR2 platforms

The module replaces an empty slot or a lower-capacity stick in a board that accepts DDR2 memory. The jump is worthwhile when the existing configuration cannot hold the operating system and active applications together.

Build integration with 1.8V DDR2 boards

The stick needs a motherboard with 240-pin DDR2 slots and a memory controller that supports 128M x 72 organisation at 1.8V. It frees one slot for additional modules while keeping the voltage requirement consistent across the array.

Ciri-ciri utama

  • 1GB capacity for basic desktop tasks
  • DDR2 technology at 400MHz speed
  • 240-pin DIMM fits standard desktop slots
  • 8V operation reduces power draw
  • 128M x 72 dual-rank configuration

Spesifikasi

Capacity1GB

Soalan tentang produk ini

Will the 240-pin DIMM fit my motherboard slots?

The module uses the standard 240-pin DIMM form factor for DDR2 desktop memory. Check that your board has DDR2 DIMM slots and supports 1.8V operation before installing.

How do I install the 1GB DDR2 module correctly?

Power off the PC, open the case, align the notch on the module with the slot key, press firmly until both retention clips click. The step often missed is verifying the clips fully lock on both ends.

Does the 128M x 72 dual-rank module need any future maintenance?

No routine maintenance is required for this DDR2 DIMM. If errors appear later, run a memory diagnostic and reseat the module; replacement is only needed if the module itself fails.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.