Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Kingston Technology Corp.

Kingston Technology Corp. KVR400D2D8R3/1G 1GB DDR2 240-pin DIMM desktop RAM

SKU CH-QY55-BYEQ3

1GB DDR2 240-pin DIMM desktop memory running at 400 MT/s with 1.8V supply

  • Capacity1GB
  • 1GB capacity for basic desktop tasks
  • DDR2 technology at 400MHz speed
  • 240-pin DIMM fits standard desktop slots
  • 8V operation reduces power draw
  • 128M x 72 dual-rank configuration

1GB DDR2 desktop memory module

This 1GB DDR2 module plugs into a standard 240-pin DIMM slot on a desktop motherboard. It is suited for systems that require a single stick of dual-rank memory running at 1.8V.

Upgrade path for legacy DDR2 platforms

The module replaces an empty slot or a lower-capacity stick in a board that accepts DDR2 memory. The jump is worthwhile when the existing configuration cannot hold the operating system and active applications together.

Build integration with 1.8V DDR2 boards

The stick needs a motherboard with 240-pin DDR2 slots and a memory controller that supports 128M x 72 organisation at 1.8V. It frees one slot for additional modules while keeping the voltage requirement consistent across the array.

Najważniejsze cechy

  • 1GB capacity for basic desktop tasks
  • DDR2 technology at 400MHz speed
  • 240-pin DIMM fits standard desktop slots
  • 8V operation reduces power draw
  • 128M x 72 dual-rank configuration

Specyfikacja

Capacity1GB

Pytania dotyczące tego produktu

Will the 240-pin DIMM fit my motherboard slots?

The module uses the standard 240-pin DIMM form factor for DDR2 desktop memory. Check that your board has DDR2 DIMM slots and supports 1.8V operation before installing.

How do I install the 1GB DDR2 module correctly?

Power off the PC, open the case, align the notch on the module with the slot key, press firmly until both retention clips click. The step often missed is verifying the clips fully lock on both ends.

Does the 128M x 72 dual-rank module need any future maintenance?

No routine maintenance is required for this DDR2 DIMM. If errors appear later, run a memory diagnostic and reseat the module; replacement is only needed if the module itself fails.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.