Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small rectangular OLED module with yellow and blue pixels on white PCB

LORDWORLD

LORDWORLD 0.96 Inch OLED Display Module Yellow & Blue Color (White)

SKU CH-T5PE-TQYEJ

A 0.96 inch OLED module with 28×64 resolution, SPI and I2C interfaces, and onboard voltage translation for Raspberry Pi, Arduino and STM32 projects

  • Ultra-narrow bezel gives a compact 0.96 inch display area
  • 28×64 pixel OLED shows yellow and blue colours
  • Dual SPI and I2C interfaces simplify wiring for many boards
  • Onboard voltage translator eases connection to different logic levels
  • Online examples for Raspberry Pi, Arduino and STM32 speed up development

Compact OLED Module

The LORDWORLD 0.96 inch OLED display module is a compact screen with an ultra-narrow bezel designed for maker projects. It features a yellow and blue colour scheme on a white PCB and includes an onboard voltage translator. The module connects via 4-wire SPI or I2C interfaces for broad microcontroller compatibility.

Makers Needing Small Visual Output

This module suits developers adding status readouts, sensor data or simple menus to Raspberry Pi, Arduino or STM32 builds. Online example code is provided for those platforms. Builders who require a larger viewing area, higher resolution graphics or touch input should consider other display options.

Dual SPI and I2C Interface

The single specification that decides fit is the combined 4-wire SPI and I2C communication support on one board. This dual interface lets you choose the faster SPI path or the two-wire I2C bus depending on available GPIO pins and project wiring constraints.

Priekšrocības

  • Ultra-narrow bezel gives a compact 0.96 inch display area
  • 28×64 pixel OLED shows yellow and blue colours
  • Dual SPI and I2C interfaces simplify wiring for many boards
  • Onboard voltage translator eases connection to different logic levels
  • Online examples for Raspberry Pi, Arduino and STM32 speed up development

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Which development board header do I connect the 28×64 OLED module to for SPI or I2C communication?

Wire the module to the 28-pin header on a Raspberry Pi 4B, 3B+, 3B, 2B+, Zero W, WH or 2W, or to the matching GPIO header on an Arduino or STM32 board.

Will the onboard voltage translator let me drive the display from 5 V logic on older Arduino boards?

Yes, the built-in voltage translator shifts 5 V signals down to the panel's logic level so older 5 V Arduino boards can communicate without extra level-shifting hardware.

How do I confirm the yellow and blue pixel areas are active after uploading a test sketch?

Run the supplied example code for your platform; the screen should show yellow pixels in the upper rows and blue pixels in the lower rows, proving the driver and colour zones are working.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.