Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small rectangular OLED module with yellow and blue pixels on white PCB

LORDWORLD

LORDWORLD 0.96 Inch OLED Display Module Yellow & Blue Color (White)

SKU CH-T5PE-TQYEJ

A 0.96 inch OLED module with 28×64 resolution, SPI and I2C interfaces, and onboard voltage translation for Raspberry Pi, Arduino and STM32 projects

  • Ultra-narrow bezel gives a compact 0.96 inch display area
  • 28×64 pixel OLED shows yellow and blue colours
  • Dual SPI and I2C interfaces simplify wiring for many boards
  • Onboard voltage translator eases connection to different logic levels
  • Online examples for Raspberry Pi, Arduino and STM32 speed up development

Compact OLED Module

The LORDWORLD 0.96 inch OLED display module is a compact screen with an ultra-narrow bezel designed for maker projects. It features a yellow and blue colour scheme on a white PCB and includes an onboard voltage translator. The module connects via 4-wire SPI or I2C interfaces for broad microcontroller compatibility.

Makers Needing Small Visual Output

This module suits developers adding status readouts, sensor data or simple menus to Raspberry Pi, Arduino or STM32 builds. Online example code is provided for those platforms. Builders who require a larger viewing area, higher resolution graphics or touch input should consider other display options.

Dual SPI and I2C Interface

The single specification that decides fit is the combined 4-wire SPI and I2C communication support on one board. This dual interface lets you choose the faster SPI path or the two-wire I2C bus depending on available GPIO pins and project wiring constraints.

Přednosti

  • Ultra-narrow bezel gives a compact 0.96 inch display area
  • 28×64 pixel OLED shows yellow and blue colours
  • Dual SPI and I2C interfaces simplify wiring for many boards
  • Onboard voltage translator eases connection to different logic levels
  • Online examples for Raspberry Pi, Arduino and STM32 speed up development

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

Which development board header do I connect the 28×64 OLED module to for SPI or I2C communication?

Wire the module to the 28-pin header on a Raspberry Pi 4B, 3B+, 3B, 2B+, Zero W, WH or 2W, or to the matching GPIO header on an Arduino or STM32 board.

Will the onboard voltage translator let me drive the display from 5 V logic on older Arduino boards?

Yes, the built-in voltage translator shifts 5 V signals down to the panel's logic level so older 5 V Arduino boards can communicate without extra level-shifting hardware.

How do I confirm the yellow and blue pixel areas are active after uploading a test sketch?

Run the supplied example code for your platform; the screen should show yellow pixels in the upper rows and blue pixels in the lower rows, proving the driver and colour zones are working.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.