我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Small rectangular OLED module with yellow and blue pixels on white PCB

LORDWORLD

LORDWORLD 0.96 Inch OLED Display Module Yellow & Blue Color (White)

SKU CH-T5PE-TQYEJ

A 0.96 inch OLED module with 28×64 resolution, SPI and I2C interfaces, and onboard voltage translation for Raspberry Pi, Arduino and STM32 projects

  • Ultra-narrow bezel gives a compact 0.96 inch display area
  • 28×64 pixel OLED shows yellow and blue colours
  • Dual SPI and I2C interfaces simplify wiring for many boards
  • Onboard voltage translator eases connection to different logic levels
  • Online examples for Raspberry Pi, Arduino and STM32 speed up development

Compact OLED Module

The LORDWORLD 0.96 inch OLED display module is a compact screen with an ultra-narrow bezel designed for maker projects. It features a yellow and blue colour scheme on a white PCB and includes an onboard voltage translator. The module connects via 4-wire SPI or I2C interfaces for broad microcontroller compatibility.

Makers Needing Small Visual Output

This module suits developers adding status readouts, sensor data or simple menus to Raspberry Pi, Arduino or STM32 builds. Online example code is provided for those platforms. Builders who require a larger viewing area, higher resolution graphics or touch input should consider other display options.

Dual SPI and I2C Interface

The single specification that decides fit is the combined 4-wire SPI and I2C communication support on one board. This dual interface lets you choose the faster SPI path or the two-wire I2C bus depending on available GPIO pins and project wiring constraints.

商品特色

  • Ultra-narrow bezel gives a compact 0.96 inch display area
  • 28×64 pixel OLED shows yellow and blue colours
  • Dual SPI and I2C interfaces simplify wiring for many boards
  • Onboard voltage translator eases connection to different logic levels
  • Online examples for Raspberry Pi, Arduino and STM32 speed up development

商品規格

BrandLORDWORLD

商品問答

Which development board header do I connect the 28×64 OLED module to for SPI or I2C communication?

Wire the module to the 28-pin header on a Raspberry Pi 4B, 3B+, 3B, 2B+, Zero W, WH or 2W, or to the matching GPIO header on an Arduino or STM32 board.

Will the onboard voltage translator let me drive the display from 5 V logic on older Arduino boards?

Yes, the built-in voltage translator shifts 5 V signals down to the panel's logic level so older 5 V Arduino boards can communicate without extra level-shifting hardware.

How do I confirm the yellow and blue pixel areas are active after uploading a test sketch?

Run the supplied example code for your platform; the screen should show yellow pixels in the upper rows and blue pixels in the lower rows, proving the driver and colour zones are working.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。