Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
7 inch IPS display module with 40 pin header and DVI connector

LORDWORLD

LORDWORLD 7 Inch DVI IPS Display Module 1024×600 40PIN

SKU CH-9RJJ-JR3YS

A 7-inch IPS panel with a 1024×600 resolution and a 170° viewing angle connects via DVI with an onboard 40-pin header for Raspberry Pi Pico development

  • IPS panel gives wide 170° viewing angles
  • 1024×600 resolution delivers sharp visuals on 7 inch screen
  • DVI interface enables faster data communication
  • Onboard 40PIN header fits Raspberry Pi Pico directly
  • Built-in OSD menu allows quick brightness and contrast adjustment

7 Inch DVI Display for Raspberry Pi Pico

This 7 inch DVI display module uses an IPS panel with a 1024×600 resolution and a 170° viewing angle. It is designed for makers and developers building Raspberry Pi Pico projects that need a compact visual output. The onboard 40PIN header allows direct connection to the microcontroller board. Online resources and C/C++ examples support rapid development.

DVI Interface with Onboard 40PIN Header

The DVI interface provides higher communication speed for the display signal. A 40PIN header is soldered onto the module to match the Raspberry Pi Pico pinout. This specific connector and interface combination determines whether the screen fits your Pico-based design without adapters or extra wiring.

Integration into Pico Projects

The module mounts directly onto a Raspberry Pi Pico via the 40PIN header, freeing up GPIO pins that would otherwise drive a parallel display. An onboard OSD menu handles brightness and contrast adjustment without software overhead. The panel suits advertisement picture display and similar embedded applications where a self-contained screen is required.

Priekšrocības

  • IPS panel gives wide 170° viewing angles
  • 1024×600 resolution delivers sharp visuals on 7 inch screen
  • DVI interface enables faster data communication
  • Onboard 40PIN header fits Raspberry Pi Pico directly
  • Built-in OSD menu allows quick brightness and contrast adjustment

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

What does the 1024×600 resolution actually look like on a 7 inch IPS panel in a real project?

The 1024×600 pixel count on a 7 inch IPS panel gives a readable desktop or custom UI with the 170° viewing angle keeping colours consistent from the side.

How does the DVI interface limit what I can drive this display with?

The DVI connection carries the video signal at higher communication speed than older parallel links, but the onboard 40PIN header ties the module directly to a Raspberry Pi Pico pinout.

What physical space and mounting does the 40PIN header need on my board?

The module mounts on a Raspberry Pi Pico through its 40PIN header, so the Pico footprint plus the 7 inch screen outline defines the required keep-out area.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.