OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
LORDWORLD
A 7-inch IPS panel with a 1024×600 resolution and a 170° viewing angle connects via DVI with an onboard 40-pin header for Raspberry Pi Pico development
This 7 inch DVI display module uses an IPS panel with a 1024×600 resolution and a 170° viewing angle. It is designed for makers and developers building Raspberry Pi Pico projects that need a compact visual output. The onboard 40PIN header allows direct connection to the microcontroller board. Online resources and C/C++ examples support rapid development.
The DVI interface provides higher communication speed for the display signal. A 40PIN header is soldered onto the module to match the Raspberry Pi Pico pinout. This specific connector and interface combination determines whether the screen fits your Pico-based design without adapters or extra wiring.
The module mounts directly onto a Raspberry Pi Pico via the 40PIN header, freeing up GPIO pins that would otherwise drive a parallel display. An onboard OSD menu handles brightness and contrast adjustment without software overhead. The panel suits advertisement picture display and similar embedded applications where a self-contained screen is required.
| Brand | LORDWORLD |
|---|
The 1024×600 pixel count on a 7 inch IPS panel gives a readable desktop or custom UI with the 170° viewing angle keeping colours consistent from the side.
The DVI connection carries the video signal at higher communication speed than older parallel links, but the onboard 40PIN header ties the module directly to a Raspberry Pi Pico pinout.
The module mounts on a Raspberry Pi Pico through its 40PIN header, so the Pico footprint plus the 7 inch screen outline defines the required keep-out area.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟