Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with M.2 slot and GPIO header, labeled LORDWORLD

LORDWORLD

LORDWORLD PCIe to M.2 Adapter for Raspberry Pi 5 2230 2242

SKU CH-MWVN-4N9H0

Adds NVMe storage to Raspberry Pi 5 using 2230 or 2242 M.2 drives with PCIe Gen2 or Gen3, onboard power monitoring and a vent for active cooling

  • Adds fast NVMe storage to Raspberry Pi 5
  • Supports M.2 2230 and 2242 drive sizes
  • PCIe Gen2 and Gen3 modes for high throughput
  • Power and activity LEDs show drive status at a glance
  • Reserved vent keeps SSD cooler with Pi 5 fan airflow

Raspberry Pi 5 NVMe Adapter

This HAT+ board adds a PCIe ×1 lane to the Raspberry Pi 5 so you can attach an M.2 NVMe solid-state drive in 2230 or 2242 form factors. It is aimed at makers and embedded developers who need faster local storage than a microSD card can provide.

Check Pi Model and Drive Length

The adapter only works with the Raspberry Pi 5 Model B and will not fit earlier Pi boards. Verify that your NVMe drive is exactly 2230 or 2242 millimetres long; longer 2280 drives are not supported by this board.

Sustained Transfer and Thermal Behaviour

An onboard power-monitoring chip reports real-time drive status while a reserved airflow vent aligns with the Pi 5’s fan to move heat away from the SSD. During extended read/write sessions the ACT LED blinks continuously and the vent helps keep temperatures lower than a fully enclosed mount would.

Priekšrocības

  • Adds fast NVMe storage to Raspberry Pi 5
  • Supports M.2 2230 and 2242 drive sizes
  • PCIe Gen2 and Gen3 modes for high throughput
  • Power and activity LEDs show drive status at a glance
  • Reserved vent keeps SSD cooler with Pi 5 fan airflow

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Does the LORDWORLD adapter ship with an M.2 NVMe SSD or must I buy one separately?

The adapter board itself is supplied; an M.2 NVMe SSD in 2230 or 2242 size is not included and must be purchased separately.

Which M.2 form factors does the board accept so I know which drive to choose?

The board accepts M.2 2230 and 2242 NVMe drives, letting you pick the length that fits your capacity and budget needs.

What real-world benefit does the PCIe Gen2 or Gen3 link give when the adapter is fitted to a Raspberry Pi 5?

The PCIe ×1 Gen2 or Gen3 connection enables high-speed NVMe read and write performance, with onboard power monitoring and an airflow vent to keep drive temperatures low.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.