Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with M.2 slot and GPIO header, labeled LORDWORLD

LORDWORLD

LORDWORLD PCIe to M.2 Adapter for Raspberry Pi 5 2230 2242

SKU CH-MWVN-4N9H0

Adds NVMe storage to Raspberry Pi 5 using 2230 or 2242 M.2 drives with PCIe Gen2 or Gen3, onboard power monitoring and a vent for active cooling

  • Adds fast NVMe storage to Raspberry Pi 5
  • Supports M.2 2230 and 2242 drive sizes
  • PCIe Gen2 and Gen3 modes for high throughput
  • Power and activity LEDs show drive status at a glance
  • Reserved vent keeps SSD cooler with Pi 5 fan airflow

Raspberry Pi 5 NVMe Adapter

This HAT+ board adds a PCIe ×1 lane to the Raspberry Pi 5 so you can attach an M.2 NVMe solid-state drive in 2230 or 2242 form factors. It is aimed at makers and embedded developers who need faster local storage than a microSD card can provide.

Check Pi Model and Drive Length

The adapter only works with the Raspberry Pi 5 Model B and will not fit earlier Pi boards. Verify that your NVMe drive is exactly 2230 or 2242 millimetres long; longer 2280 drives are not supported by this board.

Sustained Transfer and Thermal Behaviour

An onboard power-monitoring chip reports real-time drive status while a reserved airflow vent aligns with the Pi 5’s fan to move heat away from the SSD. During extended read/write sessions the ACT LED blinks continuously and the vent helps keep temperatures lower than a fully enclosed mount would.

Puncte forte

  • Adds fast NVMe storage to Raspberry Pi 5
  • Supports M.2 2230 and 2242 drive sizes
  • PCIe Gen2 and Gen3 modes for high throughput
  • Power and activity LEDs show drive status at a glance
  • Reserved vent keeps SSD cooler with Pi 5 fan airflow

Specificații

BrandLORDWORLD

Întrebări despre acest articol

Does the LORDWORLD adapter ship with an M.2 NVMe SSD or must I buy one separately?

The adapter board itself is supplied; an M.2 NVMe SSD in 2230 or 2242 size is not included and must be purchased separately.

Which M.2 form factors does the board accept so I know which drive to choose?

The board accepts M.2 2230 and 2242 NVMe drives, letting you pick the length that fits your capacity and budget needs.

What real-world benefit does the PCIe Gen2 or Gen3 link give when the adapter is fitted to a Raspberry Pi 5?

The PCIe ×1 Gen2 or Gen3 connection enables high-speed NVMe read and write performance, with onboard power monitoring and an airflow vent to keep drive temperatures low.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.