Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Raspberry Pi Pico board with LCD1602 RGB display, PIR sensor, WS2812 LED strip, breadboard, and components in plastic storage box

LORDWORLD

LORDWORLD Raspberry Pi Pico Kit with LCD1602 RGB, PIR, WS2812 LED, Breadboard, Storage Box

SKU CH-QYDF-6589X

A MicroPython learning kit for Raspberry Pi Pico with LCD1602 RGB display, PIR sensor, WS2812 LED strip, breadboard and storage box

  • Learn MicroPython faster with pre-soldered Pico header
  • Display colour data on LCD1602 RGB module
  • Detect motion using included PIR sensor
  • Create light effects with 8-bit WS2812 RGB LED
  • Keep components organised in supplied plastic storage box

Kit Contents and Audience

This LORDWORLD kit bundles a Raspberry Pi Pico with a pre-soldered header, an LCD1602 RGB module, a PIR motion sensor, an 8-bit WS2812 RGB LED strip, a breadboard, and assorted wires, buttons, resistors and LEDs. Everything ships inside a plastic storage box. It is aimed at beginners and hobbyists who want a single package for learning MicroPython and basic electronics prototyping.

Capacity and Headroom

The included components support entry-level projects such as sensor reading, text output on the LCD1602, motion detection with the PIR, and colour effects on the WS2812 LEDs. The breadboard offers enough tie-points for these circuits, but complex builds involving many additional sensors or large LED matrices will exceed the supplied parts and require extra components.

Thermals Noise and Power

All parts are low-voltage devices powered from the Pico’s USB supply, so heat and noise are negligible in normal use. The LCD1602 backlight and WS2812 LEDs draw the most current, yet remain well within the USB 5 V limit for typical demo code. No active cooling is needed and the kit runs silently.

Priekšrocības

  • Learn MicroPython faster with pre-soldered Pico header
  • Display colour data on LCD1602 RGB module
  • Detect motion using included PIR sensor
  • Create light effects with 8-bit WS2812 RGB LED
  • Keep components organised in supplied plastic storage box

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Will the pre-soldered header on the Pico fit the breadboard that comes in the box?

Yes, the pre-soldered header is designed for the Raspberry Pi Pico and matches the pitch of the included solderless breadboard.

How can I confirm the LCD1602 RGB module is wired correctly after assembly?

Run a MicroPython script that initialises the display; if text appears in colour on the 1602 screen the module is working.

Which components are included and what must I source separately?

The kit supplies a Pico with pre-soldered header, LCD1602 RGB module, PIR motion sensor, 8-bit WS2812 RGB LED, alarm buzzer, potentiometer, breadboard, wires, buttons, resistors, LEDs and a plastic storage box; you only need to provide a USB cable and a computer for programming.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.