אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Raspberry Pi Pico board with LCD1602 RGB display, PIR sensor, WS2812 LED strip, breadboard, and components in plastic storage box

LORDWORLD

LORDWORLD Raspberry Pi Pico Kit with LCD1602 RGB, PIR, WS2812 LED, Breadboard, Storage Box

SKU CH-QYDF-6589X

A MicroPython learning kit for Raspberry Pi Pico with LCD1602 RGB display, PIR sensor, WS2812 LED strip, breadboard and storage box

  • Learn MicroPython faster with pre-soldered Pico header
  • Display colour data on LCD1602 RGB module
  • Detect motion using included PIR sensor
  • Create light effects with 8-bit WS2812 RGB LED
  • Keep components organised in supplied plastic storage box

Kit Contents and Audience

This LORDWORLD kit bundles a Raspberry Pi Pico with a pre-soldered header, an LCD1602 RGB module, a PIR motion sensor, an 8-bit WS2812 RGB LED strip, a breadboard, and assorted wires, buttons, resistors and LEDs. Everything ships inside a plastic storage box. It is aimed at beginners and hobbyists who want a single package for learning MicroPython and basic electronics prototyping.

Capacity and Headroom

The included components support entry-level projects such as sensor reading, text output on the LCD1602, motion detection with the PIR, and colour effects on the WS2812 LEDs. The breadboard offers enough tie-points for these circuits, but complex builds involving many additional sensors or large LED matrices will exceed the supplied parts and require extra components.

Thermals Noise and Power

All parts are low-voltage devices powered from the Pico’s USB supply, so heat and noise are negligible in normal use. The LCD1602 backlight and WS2812 LEDs draw the most current, yet remain well within the USB 5 V limit for typical demo code. No active cooling is needed and the kit runs silently.

נקודות עיקריות

  • Learn MicroPython faster with pre-soldered Pico header
  • Display colour data on LCD1602 RGB module
  • Detect motion using included PIR sensor
  • Create light effects with 8-bit WS2812 RGB LED
  • Keep components organised in supplied plastic storage box

מפרט טכני

BrandLORDWORLD

שאלות על הפריט הזה

Will the pre-soldered header on the Pico fit the breadboard that comes in the box?

Yes, the pre-soldered header is designed for the Raspberry Pi Pico and matches the pitch of the included solderless breadboard.

How can I confirm the LCD1602 RGB module is wired correctly after assembly?

Run a MicroPython script that initialises the display; if text appears in colour on the 1602 screen the module is working.

Which components are included and what must I source separately?

The kit supplies a Pico with pre-soldered header, LCD1602 RGB module, PIR motion sensor, 8-bit WS2812 RGB LED, alarm buzzer, potentiometer, breadboard, wires, buttons, resistors, LEDs and a plastic storage box; you only need to provide a USB cable and a computer for programming.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.