暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Raspberry Pi Pico board with LCD1602 RGB display, PIR sensor, WS2812 LED strip, breadboard, and components in plastic storage box

LORDWORLD

LORDWORLD Raspberry Pi Pico Kit with LCD1602 RGB, PIR, WS2812 LED, Breadboard, Storage Box

SKU CH-QYDF-6589X

A MicroPython learning kit for Raspberry Pi Pico with LCD1602 RGB display, PIR sensor, WS2812 LED strip, breadboard and storage box

  • Learn MicroPython faster with pre-soldered Pico header
  • Display colour data on LCD1602 RGB module
  • Detect motion using included PIR sensor
  • Create light effects with 8-bit WS2812 RGB LED
  • Keep components organised in supplied plastic storage box

Kit Contents and Audience

This LORDWORLD kit bundles a Raspberry Pi Pico with a pre-soldered header, an LCD1602 RGB module, a PIR motion sensor, an 8-bit WS2812 RGB LED strip, a breadboard, and assorted wires, buttons, resistors and LEDs. Everything ships inside a plastic storage box. It is aimed at beginners and hobbyists who want a single package for learning MicroPython and basic electronics prototyping.

Capacity and Headroom

The included components support entry-level projects such as sensor reading, text output on the LCD1602, motion detection with the PIR, and colour effects on the WS2812 LEDs. The breadboard offers enough tie-points for these circuits, but complex builds involving many additional sensors or large LED matrices will exceed the supplied parts and require extra components.

Thermals Noise and Power

All parts are low-voltage devices powered from the Pico’s USB supply, so heat and noise are negligible in normal use. The LCD1602 backlight and WS2812 LEDs draw the most current, yet remain well within the USB 5 V limit for typical demo code. No active cooling is needed and the kit runs silently.

特長

  • Learn MicroPython faster with pre-soldered Pico header
  • Display colour data on LCD1602 RGB module
  • Detect motion using included PIR sensor
  • Create light effects with 8-bit WS2812 RGB LED
  • Keep components organised in supplied plastic storage box

仕様

BrandLORDWORLD

この商品に関する質問

Will the pre-soldered header on the Pico fit the breadboard that comes in the box?

Yes, the pre-soldered header is designed for the Raspberry Pi Pico and matches the pitch of the included solderless breadboard.

How can I confirm the LCD1602 RGB module is wired correctly after assembly?

Run a MicroPython script that initialises the display; if text appears in colour on the 1602 screen the module is working.

Which components are included and what must I source separately?

The kit supplies a Pico with pre-soldered header, LCD1602 RGB module, PIR motion sensor, 8-bit WS2812 RGB LED, alarm buzzer, potentiometer, breadboard, wires, buttons, resistors, LEDs and a plastic storage box; you only need to provide a USB cable and a computer for programming.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。