NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Mean Well
A 36 V 5.2 A LED driver delivering 185 W with up to 94 % efficiency, active PFC, IP67/IP65 rating and adjustable output for indoor or outdoor lighting
The Mean Well HLG-185H-36A is a 185W single-output switching power supply designed for LED lighting and street lighting applications. It delivers a fixed 36V output at 5.2A with high efficiency up to 94% and built-in active PFC. The unit carries IP67 and IP65 ratings for indoor or outdoor installations. It meets 4kV surge immunity level IEC61000-4-5 and suits Class I Division 2 hazardous locations.
Installation uses universal AC input up to 305VAC with free air convection cooling requiring no fan. A-Type models allow output voltage and constant current adjustment via internal potentiometer. B-Type adds 3 in 1 dimming via 1~10VDC PWM signal or resistance. C-Type provides terminal block I/O connections while Blank-Type uses cables. Protections cover short circuit over current over voltage and over temperature. Wiring must respect the IP rating chosen for the environment.
The 185W rating comfortably handles LED arrays drawing up to 5.2A at 36V. Headroom exists for surge events at the rated 4kV immunity level. The driver runs out when load exceeds 185W or when input voltage falls outside the universal range. Builders needing higher wattage should consider 240W models while those requiring lower power can select 150W variants. The 7-year warranty covers the rated operating envelope.
| Type | AT |
|---|
Measure the output with a multimeter under load; the unit should show 36V and up to 5.2A, and the LED string should run at full brightness without flicker.
The power supply unit is supplied; you must provide AC input cable, DC output wiring, and any dimming control wires required for your installation.
Choose A-Type for internal potentiometer adjustment, B-Type for 1-10V, PWM or resistance dimming, Blank-Type for simple cable connection, or D-Type for timer dimming.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?