NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
Mean Well
A 36 V 5.2 A LED driver delivering 185 W with up to 94 % efficiency, active PFC, IP67/IP65 rating and adjustable output for indoor or outdoor lighting
The Mean Well HLG-185H-36A is a 185W single-output switching power supply designed for LED lighting and street lighting applications. It delivers a fixed 36V output at 5.2A with high efficiency up to 94% and built-in active PFC. The unit carries IP67 and IP65 ratings for indoor or outdoor installations. It meets 4kV surge immunity level IEC61000-4-5 and suits Class I Division 2 hazardous locations.
Installation uses universal AC input up to 305VAC with free air convection cooling requiring no fan. A-Type models allow output voltage and constant current adjustment via internal potentiometer. B-Type adds 3 in 1 dimming via 1~10VDC PWM signal or resistance. C-Type provides terminal block I/O connections while Blank-Type uses cables. Protections cover short circuit over current over voltage and over temperature. Wiring must respect the IP rating chosen for the environment.
The 185W rating comfortably handles LED arrays drawing up to 5.2A at 36V. Headroom exists for surge events at the rated 4kV immunity level. The driver runs out when load exceeds 185W or when input voltage falls outside the universal range. Builders needing higher wattage should consider 240W models while those requiring lower power can select 150W variants. The 7-year warranty covers the rated operating envelope.
| Type | AT |
|---|
Measure the output with a multimeter under load; the unit should show 36V and up to 5.2A, and the LED string should run at full brightness without flicker.
The power supply unit is supplied; you must provide AC input cable, DC output wiring, and any dimming control wires required for your installation.
Choose A-Type for internal potentiometer adjustment, B-Type for 1-10V, PWM or resistance dimming, Blank-Type for simple cable connection, or D-Type for timer dimming.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?