NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Mean Well
A 36 V 5.2 A LED driver delivering 185 W with up to 94 % efficiency, active PFC, IP67/IP65 rating and adjustable output for indoor or outdoor lighting
The Mean Well HLG-185H-36A is a 185W single-output switching power supply designed for LED lighting and street lighting applications. It delivers a fixed 36V output at 5.2A with high efficiency up to 94% and built-in active PFC. The unit carries IP67 and IP65 ratings for indoor or outdoor installations. It meets 4kV surge immunity level IEC61000-4-5 and suits Class I Division 2 hazardous locations.
Installation uses universal AC input up to 305VAC with free air convection cooling requiring no fan. A-Type models allow output voltage and constant current adjustment via internal potentiometer. B-Type adds 3 in 1 dimming via 1~10VDC PWM signal or resistance. C-Type provides terminal block I/O connections while Blank-Type uses cables. Protections cover short circuit over current over voltage and over temperature. Wiring must respect the IP rating chosen for the environment.
The 185W rating comfortably handles LED arrays drawing up to 5.2A at 36V. Headroom exists for surge events at the rated 4kV immunity level. The driver runs out when load exceeds 185W or when input voltage falls outside the universal range. Builders needing higher wattage should consider 240W models while those requiring lower power can select 150W variants. The 7-year warranty covers the rated operating envelope.
| Type | AT |
|---|
Measure the output with a multimeter under load; the unit should show 36V and up to 5.2A, and the LED string should run at full brightness without flicker.
The power supply unit is supplied; you must provide AC input cable, DC output wiring, and any dimming control wires required for your installation.
Choose A-Type for internal potentiometer adjustment, B-Type for 1-10V, PWM or resistance dimming, Blank-Type for simple cable connection, or D-Type for timer dimming.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?