Micron 2500 enterprise SSD 1TB M.2 2280 MTFDKBA1T0QGN-1BN1AABYYR
- M.2 2280
- 1TB
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Micron
Enterprise 2TB M.2 2280 SSD with PCIe 4.0 x4 NVMe interface, 232-layer QLC NAND, up to 7100 MB/s sequential read and 6000 MB/s write, 1000 KIOPS random performance, and 600 TBW endurance
Capacity M.2 2280 - 2TB
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
The Micron 2500 Series delivers 2TB of storage in an M.2 2280 form factor using 232-layer 3D QLC NAND. It connects via a PCIe 4.0 x4 interface and supports the NVMe 1.4c specification. Sequential reads reach up to 7100 MB/s while sequential writes reach up to 6000 MB/s.
The drive is rated for up to 600 TBW and operates within a commercial temperature range of 0°C to 70°C. It supports TCG/Opal 2.02 for self-encryption and TCG/Pyrite 2.01 for non-encrypting security. Power loss protection safeguards data at rest, and digitally signed firmware helps maintain supply-chain integrity.
As a QLC-based drive, sustained heavy write workloads will see reduced performance once the SLC cache is exhausted. The DRAM-less architecture relies on Host Memory Buffer support from the host system for mapping tables. Buyers needing higher write endurance or consistent performance without host DRAM should consider alternative drive classes.
| Brand | Micron |
|---|---|
| Series | 2500 Series |
| Model | Micorn 2500 |
| Part Number | MTFDKBA2T0QGN-1BN1AABYYR |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D QLC NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7100 MB/s |
| Max Sequential Write | Up to 6000 MB/s |
| 4KB Random Read | Up to 1000 KIOPS |
| 4KB Random Write | Up to 1000 KIOPS |
| Operating Temperature | Commercial (0°C to +70°C) |
| Sūtījuma svars | 0.09 kg |
| Sūtījuma izmēri | 152 × 127 × 51 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the PCIe 4.0 x4 interface supports up to 7100 MB/s sequential read and 6000 MB/s sequential write.
It fits a standard M.2 2280 slot, which is 22 mm wide and 80 mm long.
Insert the drive into the M.2 slot, secure it with the screw, then enable NVMe in the BIOS so the OS detects it.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?