Micron
Micron 2500 Series 2TB M.2 2280 Enterprise SSD MTFDKBA2T0QGN-1BN1AABYYR
- Internal Solid Stat…
- Consumer
139,99 $
0.00179573BTC
Krājumā
Micron
Micron 2500 enterprise SSD 1TB M.2 2280 MTFDKBA1T0QGN-1BN1AABYYR
Enterprise NVMe SSD with 1 TB of 3D QLC NAND, PCIe 4.0 x4 interface, up to 7100 MB/s read and 6000 MB/s write, 600 TBW endurance, TCG/Opal 2.02 encryption, and 2 million-hour MTTF
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D QLC NAND
- InterfacePCI-Express 4.0 x4
- Max Sequential ReadUp to 7100 MB/s
- Max Sequential WriteUp to 6000 MB/s
Capacity M.2 2280 - 1TB
- M.2 2230 - 1TB
- M.2 2230 - 2TB
- M.2 2280 - 1TB
- M.2 2280 - 2TB
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
- Enterprise speed for heavy workloads with 7100 MB/s sequential read
- Fast random access for databases at 1000 KIOPS read and write
- 1 TB capacity built on 232-layer QLC NAND density
- TCG Opal 2.02 encryption protects data at rest
- 600 TBW endurance and 2 million hour MTTF for reliability
Micron 2500 enterprise SSD 1TB
The Micron 2500 series delivers a 1TB M.2 2280 drive built for enterprise workloads. It uses 232-layer 3D QLC NAND and a PCI-Express 4.0 x4 interface with NVMe 1.4c support. The drive targets servers and workstations that need high-capacity flash storage in a compact form factor.
M.2 2280 build with PCIe 4.0 x4
The single-sided M.2 2280 module fits standard enterprise slots and runs on a 3.3V supply. It operates from 0°C to 70°C without a heatsink requirement in typical server airflow. TCG/Opal 2.02 and TCG/Pyrite 2.01 compliance covers both self-encrypting and non-encrypting security modes. Digitally signed firmware and power-loss signal support protect data at rest.
600TB written endurance decides fit
Endurance is rated at up to 600TB total bytes written, which determines whether the drive suits your write-intensive workload. Sequential speeds reach 7100MB/s read and 6000MB/s write, while random 4KB performance hits 1000KIOPS read and write. Latency sits at 50µs read and 12µs write typical. Buyers needing higher write endurance should consider drives with a larger TBW rating.
Priekšrocības
- Enterprise speed for heavy workloads with 7100 MB/s sequential read
- Fast random access for databases at 1000 KIOPS read and write
- 1 TB capacity built on 232-layer QLC NAND density
- TCG Opal 2.02 encryption protects data at rest
- 600 TBW endurance and 2 million hour MTTF for reliability
Specifikācijas
| Brand | Micron |
|---|---|
| Series | 2500 Series |
| Model | Micorn 2500 |
| Part Number | MTFDKBA1T0QGN-1BN1AABYYR |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D QLC NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7100 MB/s |
| Max Sequential Write | Up to 6000 MB/s |
| 4KB Random Read | Up to 1000 KIOPS |
| 4KB Random Write | Up to 1000 KIOPS |
| Operating Temperature | Commercial (0°C to +70°C) |
| Sūtījuma svars | 0.23 kg |
| Sūtījuma izmēri | 102 × 51 × 25 mm |
Citas šī modeļa versijas
Vēl 1 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Jautājumi par šo preci
Does the PCIe 4.0 x4 interface cap real-world throughput at the 7100 MB/s read and 6000 MB/s write figures?
Yes, the PCIe 4.0 x4 link sets the ceiling; the drive reaches up to 7100 MB/s sequential read and up to 6000 MB/s sequential write under typical fresh-out-of-box conditions.
What physical slot and mounting does the M.2 2280 form factor require?
It fits a standard M.2 2280 key-M slot (80 mm length) and is secured with a single motherboard standoff screw; the drive uses 3.3 V power from the slot.
How is the drive installed and what step do builders often miss?
Insert the drive into the M.2 slot, fasten the retaining screw, then initialise the namespace in the OS disk utility or the drive will not appear as a usable volume.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
