我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green printed circuit board M.2 2280 SSD with black controller and silver label

Micron

Micron 2500 enterprise SSD 1TB M.2 2280 MTFDKBA1T0QGN-1BN1AABYYR

SKU CH-JSFV-ANMYR MPN MTFDKBA1T0QGN-1BN1AABYYR

Enterprise NVMe SSD with 1 TB of 3D QLC NAND, PCIe 4.0 x4 interface, up to 7100 MB/s read and 6000 MB/s write, 600 TBW endurance, TCG/Opal 2.02 encryption, and 2 million-hour MTTF

  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D QLC NAND
  • InterfacePCI-Express 4.0 x4
  • Max Sequential ReadUp to 7100 MB/s
  • Max Sequential WriteUp to 6000 MB/s

Capacity M.2 2280 - 1TB

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Enterprise speed for heavy workloads with 7100 MB/s sequential read
  • Fast random access for databases at 1000 KIOPS read and write
  • 1 TB capacity built on 232-layer QLC NAND density
  • TCG Opal 2.02 encryption protects data at rest
  • 600 TBW endurance and 2 million hour MTTF for reliability

Micron 2500 enterprise SSD 1TB

The Micron 2500 series delivers a 1TB M.2 2280 drive built for enterprise workloads. It uses 232-layer 3D QLC NAND and a PCI-Express 4.0 x4 interface with NVMe 1.4c support. The drive targets servers and workstations that need high-capacity flash storage in a compact form factor.

M.2 2280 build with PCIe 4.0 x4

The single-sided M.2 2280 module fits standard enterprise slots and runs on a 3.3V supply. It operates from 0°C to 70°C without a heatsink requirement in typical server airflow. TCG/Opal 2.02 and TCG/Pyrite 2.01 compliance covers both self-encrypting and non-encrypting security modes. Digitally signed firmware and power-loss signal support protect data at rest.

600TB written endurance decides fit

Endurance is rated at up to 600TB total bytes written, which determines whether the drive suits your write-intensive workload. Sequential speeds reach 7100MB/s read and 6000MB/s write, while random 4KB performance hits 1000KIOPS read and write. Latency sits at 50µs read and 12µs write typical. Buyers needing higher write endurance should consider drives with a larger TBW rating.

商品特色

  • Enterprise speed for heavy workloads with 7100 MB/s sequential read
  • Fast random access for databases at 1000 KIOPS read and write
  • 1 TB capacity built on 232-layer QLC NAND density
  • TCG Opal 2.02 encryption protects data at rest
  • 600 TBW endurance and 2 million hour MTTF for reliability

商品規格

BrandMicron
Series2500 Series
ModelMicorn 2500
Part NumberMTFDKBA1T0QGN-1BN1AABYYR
Form FactorM.2 2280
Capacity1TB
Memory Components3D QLC NAND
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 7100 MB/s
Max Sequential WriteUp to 6000 MB/s
4KB Random ReadUp to 1000 KIOPS
4KB Random WriteUp to 1000 KIOPS
Operating TemperatureCommercial (0°C to +70°C)
出貨重量0.23 kg
包裝尺寸102 × 51 × 25 mm

其他版本

同系列還有 1 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the PCIe 4.0 x4 interface cap real-world throughput at the 7100 MB/s read and 6000 MB/s write figures?

Yes, the PCIe 4.0 x4 link sets the ceiling; the drive reaches up to 7100 MB/s sequential read and up to 6000 MB/s sequential write under typical fresh-out-of-box conditions.

What physical slot and mounting does the M.2 2280 form factor require?

It fits a standard M.2 2280 key-M slot (80 mm length) and is secured with a single motherboard standoff screw; the drive uses 3.3 V power from the slot.

How is the drive installed and what step do builders often miss?

Insert the drive into the M.2 slot, fasten the retaining screw, then initialise the namespace in the OS disk utility or the drive will not appear as a usable volume.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。