Micron 2500 Series 2TB M.2 2280 Enterprise SSD MTFDKBA2T0QGN-1BN1AABYYR
- Internal Solid Stat…
- Consumer
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
Micron
Enterprise NVMe SSD with 1 TB of 3D QLC NAND, PCIe 4.0 x4 interface, up to 7100 MB/s read and 6000 MB/s write, 600 TBW endurance, TCG/Opal 2.02 encryption, and 2 million-hour MTTF
Capacity M.2 2280 - 1TB
Versi yang dicoret wujud, tetapi tidak tersedia di sini.
The Micron 2500 series delivers a 1TB M.2 2280 drive built for enterprise workloads. It uses 232-layer 3D QLC NAND and a PCI-Express 4.0 x4 interface with NVMe 1.4c support. The drive targets servers and workstations that need high-capacity flash storage in a compact form factor.
The single-sided M.2 2280 module fits standard enterprise slots and runs on a 3.3V supply. It operates from 0°C to 70°C without a heatsink requirement in typical server airflow. TCG/Opal 2.02 and TCG/Pyrite 2.01 compliance covers both self-encrypting and non-encrypting security modes. Digitally signed firmware and power-loss signal support protect data at rest.
Endurance is rated at up to 600TB total bytes written, which determines whether the drive suits your write-intensive workload. Sequential speeds reach 7100MB/s read and 6000MB/s write, while random 4KB performance hits 1000KIOPS read and write. Latency sits at 50µs read and 12µs write typical. Buyers needing higher write endurance should consider drives with a larger TBW rating.
| Brand | Micron |
|---|---|
| Series | 2500 Series |
| Model | Micorn 2500 |
| Part Number | MTFDKBA1T0QGN-1BN1AABYYR |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D QLC NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7100 MB/s |
| Max Sequential Write | Up to 6000 MB/s |
| 4KB Random Read | Up to 1000 KIOPS |
| 4KB Random Write | Up to 1000 KIOPS |
| Operating Temperature | Commercial (0°C to +70°C) |
| Berat penghantaran | 0.23 kg |
| Dimensi bungkusan | 102 × 51 × 25 mm |
Versi lain model ini
Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.
Yes, the PCIe 4.0 x4 link sets the ceiling; the drive reaches up to 7100 MB/s sequential read and up to 6000 MB/s sequential write under typical fresh-out-of-box conditions.
It fits a standard M.2 2280 key-M slot (80 mm length) and is secured with a single motherboard standoff screw; the drive uses 3.3 V power from the slot.
Insert the drive into the M.2 slot, fasten the retaining screw, then initialise the namespace in the OS disk utility or the drive will not appear as a usable volume.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
Tiada bahasa yang sepadan.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?