저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green printed circuit board M.2 2280 SSD with black controller and silver label

Micron

Micron 2500 enterprise SSD 1TB M.2 2280 MTFDKBA1T0QGN-1BN1AABYYR

SKU CH-JSFV-ANMYR MPN MTFDKBA1T0QGN-1BN1AABYYR

Enterprise NVMe SSD with 1 TB of 3D QLC NAND, PCIe 4.0 x4 interface, up to 7100 MB/s read and 6000 MB/s write, 600 TBW endurance, TCG/Opal 2.02 encryption, and 2 million-hour MTTF

  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D QLC NAND
  • InterfacePCI-Express 4.0 x4
  • Max Sequential ReadUp to 7100 MB/s
  • Max Sequential WriteUp to 6000 MB/s

Capacity M.2 2280 - 1TB

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • Enterprise speed for heavy workloads with 7100 MB/s sequential read
  • Fast random access for databases at 1000 KIOPS read and write
  • 1 TB capacity built on 232-layer QLC NAND density
  • TCG Opal 2.02 encryption protects data at rest
  • 600 TBW endurance and 2 million hour MTTF for reliability

Micron 2500 enterprise SSD 1TB

The Micron 2500 series delivers a 1TB M.2 2280 drive built for enterprise workloads. It uses 232-layer 3D QLC NAND and a PCI-Express 4.0 x4 interface with NVMe 1.4c support. The drive targets servers and workstations that need high-capacity flash storage in a compact form factor.

M.2 2280 build with PCIe 4.0 x4

The single-sided M.2 2280 module fits standard enterprise slots and runs on a 3.3V supply. It operates from 0°C to 70°C without a heatsink requirement in typical server airflow. TCG/Opal 2.02 and TCG/Pyrite 2.01 compliance covers both self-encrypting and non-encrypting security modes. Digitally signed firmware and power-loss signal support protect data at rest.

600TB written endurance decides fit

Endurance is rated at up to 600TB total bytes written, which determines whether the drive suits your write-intensive workload. Sequential speeds reach 7100MB/s read and 6000MB/s write, while random 4KB performance hits 1000KIOPS read and write. Latency sits at 50µs read and 12µs write typical. Buyers needing higher write endurance should consider drives with a larger TBW rating.

주요 특징

  • Enterprise speed for heavy workloads with 7100 MB/s sequential read
  • Fast random access for databases at 1000 KIOPS read and write
  • 1 TB capacity built on 232-layer QLC NAND density
  • TCG Opal 2.02 encryption protects data at rest
  • 600 TBW endurance and 2 million hour MTTF for reliability

사양

BrandMicron
Series2500 Series
ModelMicorn 2500
Part NumberMTFDKBA1T0QGN-1BN1AABYYR
Form FactorM.2 2280
Capacity1TB
Memory Components3D QLC NAND
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 7100 MB/s
Max Sequential WriteUp to 6000 MB/s
4KB Random ReadUp to 1000 KIOPS
4KB Random WriteUp to 1000 KIOPS
Operating TemperatureCommercial (0°C to +70°C)
배송 무게0.23 kg
포장 크기102 × 51 × 25 mm

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does the PCIe 4.0 x4 interface cap real-world throughput at the 7100 MB/s read and 6000 MB/s write figures?

Yes, the PCIe 4.0 x4 link sets the ceiling; the drive reaches up to 7100 MB/s sequential read and up to 6000 MB/s sequential write under typical fresh-out-of-box conditions.

What physical slot and mounting does the M.2 2280 form factor require?

It fits a standard M.2 2280 key-M slot (80 mm length) and is secured with a single motherboard standoff screw; the drive uses 3.3 V power from the slot.

How is the drive installed and what step do builders often miss?

Insert the drive into the M.2 slot, fasten the retaining screw, then initialise the namespace in the OS disk utility or the drive will not appear as a usable volume.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.