Micron 2500 Series 2TB M.2 2280 Enterprise SSD MTFDKBA2T0QGN-1BN1AABYYR
- Internal Solid Stat…
- Consumer
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Micron
Enterprise NVMe SSD with 1 TB of 3D QLC NAND, PCIe 4.0 x4 interface, up to 7100 MB/s read and 6000 MB/s write, 600 TBW endurance, TCG/Opal 2.02 encryption, and 2 million-hour MTTF
Capacity M.2 2280 - 1TB
Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.
The Micron 2500 series delivers a 1TB M.2 2280 drive built for enterprise workloads. It uses 232-layer 3D QLC NAND and a PCI-Express 4.0 x4 interface with NVMe 1.4c support. The drive targets servers and workstations that need high-capacity flash storage in a compact form factor.
The single-sided M.2 2280 module fits standard enterprise slots and runs on a 3.3V supply. It operates from 0°C to 70°C without a heatsink requirement in typical server airflow. TCG/Opal 2.02 and TCG/Pyrite 2.01 compliance covers both self-encrypting and non-encrypting security modes. Digitally signed firmware and power-loss signal support protect data at rest.
Endurance is rated at up to 600TB total bytes written, which determines whether the drive suits your write-intensive workload. Sequential speeds reach 7100MB/s read and 6000MB/s write, while random 4KB performance hits 1000KIOPS read and write. Latency sits at 50µs read and 12µs write typical. Buyers needing higher write endurance should consider drives with a larger TBW rating.
| Brand | Micron |
|---|---|
| Series | 2500 Series |
| Model | Micorn 2500 |
| Part Number | MTFDKBA1T0QGN-1BN1AABYYR |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D QLC NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7100 MB/s |
| Max Sequential Write | Up to 6000 MB/s |
| 4KB Random Read | Up to 1000 KIOPS |
| 4KB Random Write | Up to 1000 KIOPS |
| Operating Temperature | Commercial (0°C to +70°C) |
| Verzendgewicht | 0.23 kg |
| Pakketafmetingen | 102 × 51 × 25 mm |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Yes, the PCIe 4.0 x4 link sets the ceiling; the drive reaches up to 7100 MB/s sequential read and up to 6000 MB/s sequential write under typical fresh-out-of-box conditions.
It fits a standard M.2 2280 key-M slot (80 mm length) and is secured with a single motherboard standoff screw; the drive uses 3.3 V power from the slot.
Insert the drive into the M.2 slot, fasten the retaining screw, then initialise the namespace in the OS disk utility or the drive will not appear as a usable volume.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?