Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board M.2 2280 SSD with black controller and silver label

Micron

Micron 2500 enterprise SSD 1TB M.2 2280 MTFDKBA1T0QGN-1BN1AABYYR

SKU CH-JSFV-ANMYR MPN MTFDKBA1T0QGN-1BN1AABYYR

Enterprise NVMe SSD with 1 TB of 3D QLC NAND, PCIe 4.0 x4 interface, up to 7100 MB/s read and 6000 MB/s write, 600 TBW endurance, TCG/Opal 2.02 encryption, and 2 million-hour MTTF

  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D QLC NAND
  • InterfacePCI-Express 4.0 x4
  • Max Sequential ReadUp to 7100 MB/s
  • Max Sequential WriteUp to 6000 MB/s

Capacity M.2 2280 - 1TB

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Enterprise speed for heavy workloads with 7100 MB/s sequential read
  • Fast random access for databases at 1000 KIOPS read and write
  • 1 TB capacity built on 232-layer QLC NAND density
  • TCG Opal 2.02 encryption protects data at rest
  • 600 TBW endurance and 2 million hour MTTF for reliability

Micron 2500 enterprise SSD 1TB

The Micron 2500 series delivers a 1TB M.2 2280 drive built for enterprise workloads. It uses 232-layer 3D QLC NAND and a PCI-Express 4.0 x4 interface with NVMe 1.4c support. The drive targets servers and workstations that need high-capacity flash storage in a compact form factor.

M.2 2280 build with PCIe 4.0 x4

The single-sided M.2 2280 module fits standard enterprise slots and runs on a 3.3V supply. It operates from 0°C to 70°C without a heatsink requirement in typical server airflow. TCG/Opal 2.02 and TCG/Pyrite 2.01 compliance covers both self-encrypting and non-encrypting security modes. Digitally signed firmware and power-loss signal support protect data at rest.

600TB written endurance decides fit

Endurance is rated at up to 600TB total bytes written, which determines whether the drive suits your write-intensive workload. Sequential speeds reach 7100MB/s read and 6000MB/s write, while random 4KB performance hits 1000KIOPS read and write. Latency sits at 50µs read and 12µs write typical. Buyers needing higher write endurance should consider drives with a larger TBW rating.

Kohokohdat

  • Enterprise speed for heavy workloads with 7100 MB/s sequential read
  • Fast random access for databases at 1000 KIOPS read and write
  • 1 TB capacity built on 232-layer QLC NAND density
  • TCG Opal 2.02 encryption protects data at rest
  • 600 TBW endurance and 2 million hour MTTF for reliability

Tekniset tiedot

BrandMicron
Series2500 Series
ModelMicorn 2500
Part NumberMTFDKBA1T0QGN-1BN1AABYYR
Form FactorM.2 2280
Capacity1TB
Memory Components3D QLC NAND
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 7100 MB/s
Max Sequential WriteUp to 6000 MB/s
4KB Random ReadUp to 1000 KIOPS
4KB Random WriteUp to 1000 KIOPS
Operating TemperatureCommercial (0°C to +70°C)
Lähetyspaino0.23 kg
Pakkauksen mitat102 × 51 × 25 mm

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the PCIe 4.0 x4 interface cap real-world throughput at the 7100 MB/s read and 6000 MB/s write figures?

Yes, the PCIe 4.0 x4 link sets the ceiling; the drive reaches up to 7100 MB/s sequential read and up to 6000 MB/s sequential write under typical fresh-out-of-box conditions.

What physical slot and mounting does the M.2 2280 form factor require?

It fits a standard M.2 2280 key-M slot (80 mm length) and is secured with a single motherboard standoff screw; the drive uses 3.3 V power from the slot.

How is the drive installed and what step do builders often miss?

Insert the drive into the M.2 slot, fasten the retaining screw, then initialise the namespace in the OS disk utility or the drive will not appear as a usable volume.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.