Micron 2500 enterprise SSD 1TB M.2 2280 MTFDKBA1T0QGN-1BN1AABYYR
- M.2 2280
- 1TB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Micron
Enterprise 2TB M.2 2280 SSD with PCIe 4.0 x4 NVMe interface, 232-layer QLC NAND, up to 7100 MB/s sequential read and 6000 MB/s write, 1000 KIOPS random performance, and 600 TBW endurance
Capacity M.2 2280 - 2TB
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The Micron 2500 Series delivers 2TB of storage in an M.2 2280 form factor using 232-layer 3D QLC NAND. It connects via a PCIe 4.0 x4 interface and supports the NVMe 1.4c specification. Sequential reads reach up to 7100 MB/s while sequential writes reach up to 6000 MB/s.
The drive is rated for up to 600 TBW and operates within a commercial temperature range of 0°C to 70°C. It supports TCG/Opal 2.02 for self-encryption and TCG/Pyrite 2.01 for non-encrypting security. Power loss protection safeguards data at rest, and digitally signed firmware helps maintain supply-chain integrity.
As a QLC-based drive, sustained heavy write workloads will see reduced performance once the SLC cache is exhausted. The DRAM-less architecture relies on Host Memory Buffer support from the host system for mapping tables. Buyers needing higher write endurance or consistent performance without host DRAM should consider alternative drive classes.
| Brand | Micron |
|---|---|
| Series | 2500 Series |
| Model | Micorn 2500 |
| Part Number | MTFDKBA2T0QGN-1BN1AABYYR |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D QLC NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7100 MB/s |
| Max Sequential Write | Up to 6000 MB/s |
| 4KB Random Read | Up to 1000 KIOPS |
| 4KB Random Write | Up to 1000 KIOPS |
| Operating Temperature | Commercial (0°C to +70°C) |
| Lähetyspaino | 0.09 kg |
| Pakkauksen mitat | 152 × 127 × 51 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the PCIe 4.0 x4 interface supports up to 7100 MB/s sequential read and 6000 MB/s sequential write.
It fits a standard M.2 2280 slot, which is 22 mm wide and 80 mm long.
Insert the drive into the M.2 slot, secure it with the screw, then enable NVMe in the BIOS so the OS detects it.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?