Micron 2500 Series 2TB M.2 2280 Enterprise SSD MTFDKBA2T0QGN-1BN1AABYYR
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Micron
Enterprise NVMe SSD with 1 TB of 3D QLC NAND, PCIe 4.0 x4 interface, up to 7100 MB/s read and 6000 MB/s write, 600 TBW endurance, TCG/Opal 2.02 encryption, and 2 million-hour MTTF
Capacity M.2 2280 - 1TB
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
The Micron 2500 series delivers a 1TB M.2 2280 drive built for enterprise workloads. It uses 232-layer 3D QLC NAND and a PCI-Express 4.0 x4 interface with NVMe 1.4c support. The drive targets servers and workstations that need high-capacity flash storage in a compact form factor.
The single-sided M.2 2280 module fits standard enterprise slots and runs on a 3.3V supply. It operates from 0°C to 70°C without a heatsink requirement in typical server airflow. TCG/Opal 2.02 and TCG/Pyrite 2.01 compliance covers both self-encrypting and non-encrypting security modes. Digitally signed firmware and power-loss signal support protect data at rest.
Endurance is rated at up to 600TB total bytes written, which determines whether the drive suits your write-intensive workload. Sequential speeds reach 7100MB/s read and 6000MB/s write, while random 4KB performance hits 1000KIOPS read and write. Latency sits at 50µs read and 12µs write typical. Buyers needing higher write endurance should consider drives with a larger TBW rating.
| Brand | Micron |
|---|---|
| Series | 2500 Series |
| Model | Micorn 2500 |
| Part Number | MTFDKBA1T0QGN-1BN1AABYYR |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D QLC NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7100 MB/s |
| Max Sequential Write | Up to 6000 MB/s |
| 4KB Random Read | Up to 1000 KIOPS |
| 4KB Random Write | Up to 1000 KIOPS |
| Operating Temperature | Commercial (0°C to +70°C) |
| Szállítási súly | 0.23 kg |
| Csomagméret | 102 × 51 × 25 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Yes, the PCIe 4.0 x4 link sets the ceiling; the drive reaches up to 7100 MB/s sequential read and up to 6000 MB/s sequential write under typical fresh-out-of-box conditions.
It fits a standard M.2 2280 key-M slot (80 mm length) and is secured with a single motherboard standoff screw; the drive uses 3.3 V power from the slot.
Insert the drive into the M.2 slot, fasten the retaining screw, then initialise the namespace in the OS disk utility or the drive will not appear as a usable volume.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?