暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board M.2 2280 SSD with black controller and silver label

Micron

Micron 2500 enterprise SSD 1TB M.2 2280 MTFDKBA1T0QGN-1BN1AABYYR

SKU CH-JSFV-ANMYR MPN MTFDKBA1T0QGN-1BN1AABYYR

Enterprise NVMe SSD with 1 TB of 3D QLC NAND, PCIe 4.0 x4 interface, up to 7100 MB/s read and 6000 MB/s write, 600 TBW endurance, TCG/Opal 2.02 encryption, and 2 million-hour MTTF

  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D QLC NAND
  • InterfacePCI-Express 4.0 x4
  • Max Sequential ReadUp to 7100 MB/s
  • Max Sequential WriteUp to 6000 MB/s

Capacity M.2 2280 - 1TB

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Enterprise speed for heavy workloads with 7100 MB/s sequential read
  • Fast random access for databases at 1000 KIOPS read and write
  • 1 TB capacity built on 232-layer QLC NAND density
  • TCG Opal 2.02 encryption protects data at rest
  • 600 TBW endurance and 2 million hour MTTF for reliability

Micron 2500 enterprise SSD 1TB

The Micron 2500 series delivers a 1TB M.2 2280 drive built for enterprise workloads. It uses 232-layer 3D QLC NAND and a PCI-Express 4.0 x4 interface with NVMe 1.4c support. The drive targets servers and workstations that need high-capacity flash storage in a compact form factor.

M.2 2280 build with PCIe 4.0 x4

The single-sided M.2 2280 module fits standard enterprise slots and runs on a 3.3V supply. It operates from 0°C to 70°C without a heatsink requirement in typical server airflow. TCG/Opal 2.02 and TCG/Pyrite 2.01 compliance covers both self-encrypting and non-encrypting security modes. Digitally signed firmware and power-loss signal support protect data at rest.

600TB written endurance decides fit

Endurance is rated at up to 600TB total bytes written, which determines whether the drive suits your write-intensive workload. Sequential speeds reach 7100MB/s read and 6000MB/s write, while random 4KB performance hits 1000KIOPS read and write. Latency sits at 50µs read and 12µs write typical. Buyers needing higher write endurance should consider drives with a larger TBW rating.

特長

  • Enterprise speed for heavy workloads with 7100 MB/s sequential read
  • Fast random access for databases at 1000 KIOPS read and write
  • 1 TB capacity built on 232-layer QLC NAND density
  • TCG Opal 2.02 encryption protects data at rest
  • 600 TBW endurance and 2 million hour MTTF for reliability

仕様

BrandMicron
Series2500 Series
ModelMicorn 2500
Part NumberMTFDKBA1T0QGN-1BN1AABYYR
Form FactorM.2 2280
Capacity1TB
Memory Components3D QLC NAND
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 7100 MB/s
Max Sequential WriteUp to 6000 MB/s
4KB Random ReadUp to 1000 KIOPS
4KB Random WriteUp to 1000 KIOPS
Operating TemperatureCommercial (0°C to +70°C)
配送重量0.23 kg
梱包サイズ102 × 51 × 25 mm

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the PCIe 4.0 x4 interface cap real-world throughput at the 7100 MB/s read and 6000 MB/s write figures?

Yes, the PCIe 4.0 x4 link sets the ceiling; the drive reaches up to 7100 MB/s sequential read and up to 6000 MB/s sequential write under typical fresh-out-of-box conditions.

What physical slot and mounting does the M.2 2280 form factor require?

It fits a standard M.2 2280 key-M slot (80 mm length) and is secured with a single motherboard standoff screw; the drive uses 3.3 V power from the slot.

How is the drive installed and what step do builders often miss?

Insert the drive into the M.2 slot, fasten the retaining screw, then initialise the namespace in the OS disk utility or the drive will not appear as a usable volume.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。